D7net Mini Sh3LL v1
OFF | cURL : OFF | WGET : ON | Perl : ON | Python : OFF
Directory (0755) : /lib/firmware/cxgb4/ |
|
| Current File : //lib/firmware/cxgb4/t6-config.txt |
# Chelsio T6 Factory Default configuration file.
#
# Copyright (C) 2014-2015 Chelsio Communications. All rights reserved.
#
# DO NOT MODIFY THIS FILE UNDER ANY CIRCUMSTANCES. MODIFICATION OF THIS FILE
# WILL RESULT IN A NON-FUNCTIONAL ADAPTER AND MAY RESULT IN PHYSICAL DAMAGE
# TO ADAPTERS.
# This file provides the default, power-on configuration for 2-port T6-based
# adapters shipped from the factory. These defaults are designed to address
# the needs of the vast majority of Terminator customers. The basic idea is to
# have a default configuration which allows a customer to plug a Terminator
# adapter in and have it work regardless of OS, driver or application except in
# the most unusual and/or demanding customer applications.
#
# Many of the Terminator resources which are described by this configuration
# are finite. This requires balancing the configuration/operation needs of
# device drivers across OSes and a large number of customer application.
#
# Some of the more important resources to allocate and their constaints are:
# 1. Virtual Interfaces: 256.
# 2. Ingress Queues with Free Lists: 1024.
# 3. Egress Queues: 128K.
# 4. MSI-X Vectors: 1088.
# 5. Multi-Port Support (MPS) TCAM: 336 entries to support MAC destination
# address matching on Ingress Packets.
#
# Some of the important OS/Driver resource needs are:
# 6. Some OS Drivers will manage all resources through a single Physical
# Function (currently PF4 but it could be any Physical Function).
# 7. Some OS Drivers will manage different ports and functions (NIC,
# storage, etc.) on different Physical Functions. For example, NIC
# functions for ports 0-1 on PF0-1, FCoE on PF4, iSCSI on PF5, etc.
#
# Some of the customer application needs which need to be accommodated:
# 8. Some customers will want to support large CPU count systems with
# good scaling. Thus, we'll need to accommodate a number of
# Ingress Queues and MSI-X Vectors to allow up to some number of CPUs
# to be involved per port and per application function. For example,
# in the case where all ports and application functions will be
# managed via a single Unified PF and we want to accommodate scaling up
# to 8 CPUs, we would want:
#
# 2 ports *
# 3 application functions (NIC, FCoE, iSCSI) per port *
# 16 Ingress Queue/MSI-X Vectors per application function
#
# for a total of 96 Ingress Queues and MSI-X Vectors on the Unified PF.
# (Plus a few for Firmware Event Queues, etc.)
#
# 9. Some customers will want to use PCI-E SR-IOV Capability to allow Virtual
# Machines to directly access T6 functionality via SR-IOV Virtual Functions
# and "PCI Device Passthrough" -- this is especially true for the NIC
# application functionality.
#
# Global configuration settings.
#
[global]
rss_glb_config_mode = basicvirtual
rss_glb_config_options = tnlmapen,hashtoeplitz,tnlalllkp
# PL_TIMEOUT register
pl_timeout_value = 200 # the timeout value in units of us
# The following Scatter Gather Engine (SGE) settings assume a 4KB Host
# Page Size and a 64B L1 Cache Line Size. It programs the
# EgrStatusPageSize and IngPadBoundary to 64B and the PktShift to 2.
# If a Master PF Driver finds itself on a machine with different
# parameters, then the Master PF Driver is responsible for initializing
# these parameters to appropriate values.
#
# Notes:
# 1. The Free List Buffer Sizes below are raw and the firmware will
# round them up to the Ingress Padding Boundary.
# 2. The SGE Timer Values below are expressed below in microseconds.
# The firmware will convert these values to Core Clock Ticks when
# it processes the configuration parameters.
#
reg[0x1008] = 0x40800/0x21c70 # SGE_CONTROL
reg[0x100c] = 0x22222222 # SGE_HOST_PAGE_SIZE
reg[0x10a0] = 0x01040810 # SGE_INGRESS_RX_THRESHOLD
reg[0x1044] = 4096 # SGE_FL_BUFFER_SIZE0
reg[0x1048] = 65536 # SGE_FL_BUFFER_SIZE1
reg[0x104c] = 1536 # SGE_FL_BUFFER_SIZE2
reg[0x1050] = 9024 # SGE_FL_BUFFER_SIZE3
reg[0x1054] = 9216 # SGE_FL_BUFFER_SIZE4
reg[0x1058] = 2048 # SGE_FL_BUFFER_SIZE5
reg[0x105c] = 128 # SGE_FL_BUFFER_SIZE6
reg[0x1060] = 8192 # SGE_FL_BUFFER_SIZE7
reg[0x1064] = 16384 # SGE_FL_BUFFER_SIZE8
sge_timer_value = 5, 10, 20, 50, 100, 200 # SGE_TIMER_VALUE* in usecs
reg[0x10c4] = 0x20000000/0x20000000 # GK_CONTROL, enable 5th thread
# Set the SGE Doorbell Queue Timer "tick" to 50us and initialize
# the Timer Table to a default set of values (which are multiples
# of the Timer Tick). Note that the set of Tick Multipliers are
# NOT sorted. The Host Drivers are expected to pick amongst them
# for (Tick * Multiplier[i]) values which most closely match the Host
# Drivers' needs. Also, most Host Drivers will be default start
# start with (Tick * Multiplier[0]), so this gives us some flexibility
# in terms of picking a Tick and a default Multiplier somewhere in
# the middle of the achievable set of (Tick * Multiplier[i]) values.
# Thus, the below select for 150us by this default.
#
sge_dbq_timertick = 50
sge_dbq_timer = 3, 2, 1, 5, 7, 9, 12, 16
# enable TP_OUT_CONFIG.IPIDSPLITMODE
reg[0x7d04] = 0x00010000/0x00010000
reg[0x7dc0] = 0x0e2f8849 # TP_SHIFT_CNT
#Tick granularities in kbps
tsch_ticks = 100000, 10000, 1000, 10
# TP_VLAN_PRI_MAP to select filter tuples and enable ServerSram
# filter control: compact, fcoemask
# server sram : srvrsram
# filter tuples : fragmentation, mpshittype, macmatch, ethertype,
# protocol, tos, vlan, vnic_id, port, fcoe
# valid filterModes are described the Terminator 5 Data Book
# vnicMode = pf_vf #default. Other values are outer_vlan, encapsulation
filterMode = fcoemask, srvrsram, fragmentation, mpshittype, protocol, vlan, port, fcoe
# filter tuples enforced in LE active region (equal to or subset of filterMode)
filterMask = protocol, fcoe
# Percentage of dynamic memory (in either the EDRAM or external MEM)
# to use for TP RX payload
tp_pmrx = 30
# TP RX payload page size
tp_pmrx_pagesize = 64K
# TP number of RX channels
tp_nrxch = 0 # 0 (auto) = 1
# Percentage of dynamic memory (in either the EDRAM or external MEM)
# to use for TP TX payload
tp_pmtx = 50
# TP TX payload page size
tp_pmtx_pagesize = 64K
# TP number of TX channels
tp_ntxch = 0 # 0 (auto) = equal number of ports
# TP OFLD MTUs
tp_mtus = 88, 256, 512, 576, 808, 1024, 1280, 1488, 1500, 2002, 2048, 4096, 4352, 8192, 9000, 9600
# enable TP_OUT_CONFIG.IPIDSPLITMODE and CRXPKTENC
reg[0x7d04] = 0x00010008/0x00010008
# TP_GLOBAL_CONFIG
reg[0x7d08] = 0x00000800/0x00000800 # set IssFromCplEnable
# TP_PC_CONFIG
reg[0x7d48] = 0x00000000/0x00000400 # clear EnableFLMError
# TP_PARA_REG0
reg[0x7d60] = 0x06000000/0x07000000 # set InitCWND to 6
# ULPRX iSCSI Page Sizes
reg[0x19168] = 0x04020100 # 64K, 16K, 8K and 4K
# LE_DB_CONFIG
reg[0x19c04] = 0x00000000/0x00440000 # LE Server SRAM disabled
# LE IPv4 compression disabled
# LE_DB_HASH_CONFIG
reg[0x19c28] = 0x00800000/0x01f00000 # LE Hash bucket size 8,
# ULP_TX_CONFIG
reg[0x8dc0] = 0x00000104/0x00000104 # Enable ITT on PI err
# Enable more error msg for ...
# TPT error.
# ULP_RX_MISC_FEATURE_ENABLE
#reg[0x1925c] = 0x01003400/0x01003400 # iscsi tag pi bit
# Enable offset decrement after ...
# PI extraction and before DDP
# ulp insert pi source info in DIF
# iscsi_eff_offset_en
#Enable iscsi completion moderation feature
reg[0x1925c] = 0x000041c0/0x000031c0 # Enable offset decrement after
# PI extraction and before DDP.
# ulp insert pi source info in
# DIF.
# Enable iscsi hdr cmd mode.
# iscsi force cmd mode.
# Enable iscsi cmp mode.
# MC configuration
#mc_mode_brc[0] = 1 # mc0 - 1: enable BRC, 0: enable RBC, 2: enable BRBC
# HMA configuration
hma_size = 92 # Size (in MBs) of host memory expected
hma_regions = stag,pbl,rq # What all regions to place in host memory
# Some "definitions" to make the rest of this a bit more readable. We support
# 4 ports, 3 functions (NIC, FCoE and iSCSI), scaling up to 8 "CPU Queue Sets"
# per function per port ...
#
# NMSIX = 1088 # available MSI-X Vectors
# NVI = 256 # available Virtual Interfaces
# NMPSTCAM = 336 # MPS TCAM entries
#
# NPORTS = 2 # ports
# NCPUS = 16 # CPUs we want to support scalably
# NFUNCS = 3 # functions per port (NIC, FCoE, iSCSI)
# Breakdown of Virtual Interface/Queue/Interrupt resources for the "Unified
# PF" which many OS Drivers will use to manage most or all functions.
#
# Each Ingress Queue can use one MSI-X interrupt but some Ingress Queues can
# use Forwarded Interrupt Ingress Queues. For these latter, an Ingress Queue
# would be created and the Queue ID of a Forwarded Interrupt Ingress Queue
# will be specified as the "Ingress Queue Asynchronous Destination Index."
# Thus, the number of MSI-X Vectors assigned to the Unified PF will be less
# than or equal to the number of Ingress Queues ...
#
# NVI_NIC = 4 # NIC access to NPORTS
# NFLIQ_NIC = 32 # NIC Ingress Queues with Free Lists
# NETHCTRL_NIC = 32 # NIC Ethernet Control/TX Queues
# NEQ_NIC = 64 # NIC Egress Queues (FL, ETHCTRL/TX)
# NMPSTCAM_NIC = 16 # NIC MPS TCAM Entries (NPORTS*4)
# NMSIX_NIC = 32 # NIC MSI-X Interrupt Vectors (FLIQ)
#
# NVI_OFLD = 0 # Offload uses NIC function to access ports
# NFLIQ_OFLD = 16 # Offload Ingress Queues with Free Lists
# NETHCTRL_OFLD = 0 # Offload Ethernet Control/TX Queues
# NEQ_OFLD = 16 # Offload Egress Queues (FL)
# NMPSTCAM_OFLD = 0 # Offload MPS TCAM Entries (uses NIC's)
# NMSIX_OFLD = 16 # Offload MSI-X Interrupt Vectors (FLIQ)
#
# NVI_RDMA = 0 # RDMA uses NIC function to access ports
# NFLIQ_RDMA = 4 # RDMA Ingress Queues with Free Lists
# NETHCTRL_RDMA = 0 # RDMA Ethernet Control/TX Queues
# NEQ_RDMA = 4 # RDMA Egress Queues (FL)
# NMPSTCAM_RDMA = 0 # RDMA MPS TCAM Entries (uses NIC's)
# NMSIX_RDMA = 4 # RDMA MSI-X Interrupt Vectors (FLIQ)
#
# NEQ_WD = 128 # Wire Direct TX Queues and FLs
# NETHCTRL_WD = 64 # Wire Direct TX Queues
# NFLIQ_WD = 64 ` # Wire Direct Ingress Queues with Free Lists
#
# NVI_ISCSI = 4 # ISCSI access to NPORTS
# NFLIQ_ISCSI = 4 # ISCSI Ingress Queues with Free Lists
# NETHCTRL_ISCSI = 0 # ISCSI Ethernet Control/TX Queues
# NEQ_ISCSI = 4 # ISCSI Egress Queues (FL)
# NMPSTCAM_ISCSI = 4 # ISCSI MPS TCAM Entries (NPORTS)
# NMSIX_ISCSI = 4 # ISCSI MSI-X Interrupt Vectors (FLIQ)
#
# NVI_FCOE = 4 # FCOE access to NPORTS
# NFLIQ_FCOE = 34 # FCOE Ingress Queues with Free Lists
# NETHCTRL_FCOE = 32 # FCOE Ethernet Control/TX Queues
# NEQ_FCOE = 66 # FCOE Egress Queues (FL)
# NMPSTCAM_FCOE = 32 # FCOE MPS TCAM Entries (NPORTS)
# NMSIX_FCOE = 34 # FCOE MSI-X Interrupt Vectors (FLIQ)
# Two extra Ingress Queues per function for Firmware Events and Forwarded
# Interrupts, and two extra interrupts per function for Firmware Events (or a
# Forwarded Interrupt Queue) and General Interrupts per function.
#
# NFLIQ_EXTRA = 6 # "extra" Ingress Queues 2*NFUNCS (Firmware and
# # Forwarded Interrupts
# NMSIX_EXTRA = 6 # extra interrupts 2*NFUNCS (Firmware and
# # General Interrupts
# Microsoft HyperV resources. The HyperV Virtual Ingress Queues will have
# their interrupts forwarded to another set of Forwarded Interrupt Queues.
#
# NVI_HYPERV = 16 # VMs we want to support
# NVIIQ_HYPERV = 2 # Virtual Ingress Queues with Free Lists per VM
# NFLIQ_HYPERV = 40 # VIQs + NCPUS Forwarded Interrupt Queues
# NEQ_HYPERV = 32 # VIQs Free Lists
# NMPSTCAM_HYPERV = 16 # MPS TCAM Entries (NVI_HYPERV)
# NMSIX_HYPERV = 8 # NCPUS Forwarded Interrupt Queues
# Adding all of the above Unified PF resource needs together: (NIC + OFLD +
# RDMA + ISCSI + FCOE + EXTRA + HYPERV)
#
# NVI_UNIFIED = 28
# NFLIQ_UNIFIED = 106
# NETHCTRL_UNIFIED = 32
# NEQ_UNIFIED = 124
# NMPSTCAM_UNIFIED = 40
#
# The sum of all the MSI-X resources above is 74 MSI-X Vectors but we'll round
# that up to 128 to make sure the Unified PF doesn't run out of resources.
#
# NMSIX_UNIFIED = 128
#
# The Storage PFs could need up to NPORTS*NCPUS + NMSIX_EXTRA MSI-X Vectors
# which is 34 but they're probably safe with 32.
#
# NMSIX_STORAGE = 32
# Note: The UnifiedPF is PF4 which doesn't have any Virtual Functions
# associated with it. Thus, the MSI-X Vector allocations we give to the
# UnifiedPF aren't inherited by any Virtual Functions. As a result we can
# provision many more Virtual Functions than we can if the UnifiedPF were
# one of PF0-3.
#
# All of the below PCI-E parameters are actually stored in various *_init.txt
# files. We include them below essentially as comments.
#
# For PF0-3 we assign 8 vectors each for NIC Ingress Queues of the associated
# ports 0-3.
#
# For PF4, the Unified PF, we give it an MSI-X Table Size as outlined above.
#
# For PF5-6 we assign enough MSI-X Vectors to support FCoE and iSCSI
# storage applications across all four possible ports.
#
# Additionally, since the UnifiedPF isn't one of the per-port Physical
# Functions, we give the UnifiedPF and the PF0-3 Physical Functions
# different PCI Device IDs which will allow Unified and Per-Port Drivers
# to directly select the type of Physical Function to which they wish to be
# attached.
#
# Note that the actual values used for the PCI-E Intelectual Property will be
# 1 less than those below since that's the way it "counts" things. For
# readability, we use the number we actually mean ...
#
# PF0_INT = 8 # NCPUS
# PF1_INT = 8 # NCPUS
# PF0_3_INT = 32 # PF0_INT + PF1_INT + PF2_INT + PF3_INT
#
# PF4_INT = 128 # NMSIX_UNIFIED
# PF5_INT = 32 # NMSIX_STORAGE
# PF6_INT = 32 # NMSIX_STORAGE
# PF7_INT = 0 # Nothing Assigned
# PF4_7_INT = 192 # PF4_INT + PF5_INT + PF6_INT + PF7_INT
#
# PF0_7_INT = 224 # PF0_3_INT + PF4_7_INT
#
# With the above we can get 17 VFs/PF0-3 (limited by 336 MPS TCAM entries)
# but we'll lower that to 16 to make our total 64 and a nice power of 2 ...
#
# NVF = 16
# For those OSes which manage different ports on different PFs, we need
# only enough resources to support a single port's NIC application functions
# on PF0-3. The below assumes that we're only doing NIC with NCPUS "Queue
# Sets" for ports 0-3. The FCoE and iSCSI functions for such OSes will be
# managed on the "storage PFs" (see below).
#
[function "0"]
nvf = 16 # NVF on this function
wx_caps = all # write/execute permissions for all commands
r_caps = all # read permissions for all commands
nvi = 1 # 1 port
niqflint = 8 # NCPUS "Queue Sets"
nethctrl = 8 # NCPUS "Queue Sets"
neq = 16 # niqflint + nethctrl Egress Queues
nexactf = 8 # number of exact MPSTCAM MAC filters
cmask = all # access to all channels
pmask = 0x1 # access to only one port
[function "1"]
nvf = 16 # NVF on this function
wx_caps = all # write/execute permissions for all commands
r_caps = all # read permissions for all commands
nvi = 1 # 1 port
niqflint = 8 # NCPUS "Queue Sets"
nethctrl = 8 # NCPUS "Queue Sets"
neq = 16 # niqflint + nethctrl Egress Queues
nexactf = 8 # number of exact MPSTCAM MAC filters
cmask = all # access to all channels
pmask = 0x2 # access to only one port
[function "2"]
nvf = 16 # NVF on this function
wx_caps = all # write/execute permissions for all commands
r_caps = all # read permissions for all commands
nvi = 1 # 1 port
niqflint = 8 # NCPUS "Queue Sets"
nethctrl = 8 # NCPUS "Queue Sets"
neq = 16 # niqflint + nethctrl Egress Queues
nexactf = 8 # number of exact MPSTCAM MAC filters
cmask = all # access to all channels
pmask = 0x4 # access to only one port
[function "3"]
nvf = 16 # NVF on this function
wx_caps = all # write/execute permissions for all commands
r_caps = all # read permissions for all commands
nvi = 1 # 1 port
niqflint = 8 # NCPUS "Queue Sets"
nethctrl = 8 # NCPUS "Queue Sets"
neq = 16 # niqflint + nethctrl Egress Queues
nexactf = 8 # number of exact MPSTCAM MAC filters
cmask = all # access to all channels
pmask = 0x8 # access to only one port
# Some OS Drivers manage all application functions for all ports via PF4.
# Thus we need to provide a large number of resources here. For Egress
# Queues we need to account for both TX Queues as well as Free List Queues
# (because the host is responsible for producing Free List Buffers for the
# hardware to consume).
#
[function "4"]
wx_caps = all # write/execute permissions for all commands
r_caps = all # read permissions for all commands
nvi = 28 # NVI_UNIFIED
niqflint = 218 # NFLIQ_UNIFIED + NLFIQ_WD + NFLIQ_CRYPTO (32)
nethctrl = 116 # NETHCTRL_UNIFIED + NETHCTRL_WD + ncrypto_lookaside
neq = 256 # NEQ_UNIFIED + NEQ_WD
nqpcq = 12288
nexactf = 40 # NMPSTCAM_UNIFIED
nrawf = 2
cmask = all # access to all channels
pmask = all # access to all four ports ...
nethofld = 1024 # number of user mode ethernet flow contexts
ncrypto_lookaside = 16 # Number of lookaside flow contexts
nclip = 320 # number of clip region entries
nfilter = 496 # number of filter region entries
nserver = 496 # number of server region entries
nhash = 12288 # number of hash region entries
nhpfilter = 64 # number of high priority filter region entries
protocol = nic_vm, ofld, rddp, rdmac, iscsi_initiator_pdu, iscsi_target_pdu, iscsi_t10dif, tlskeys, crypto_lookaside, ipsec_inline, nic_hashfilter
tp_l2t = 3072
tp_ddp = 2
tp_ddp_iscsi = 2
tp_tls_key = 3
tp_tls_mxrxsize = 17408 # 16384 + 1024, governs max rx data, pm max xfer len, rx coalesce sizes
tp_stag = 2
tp_pbl = 5
tp_rq = 7
tp_srq = 128
# We have FCoE and iSCSI storage functions on PF5 and PF6 each of which may
# need to have Virtual Interfaces on each of the four ports with up to NCPUS
# "Queue Sets" each.
#
[function "5"]
wx_caps = all # write/execute permissions for all commands
r_caps = all # read permissions for all commands
nvi = 4 # NPORTS
niqflint = 34 # NPORTS*NCPUS + NMSIX_EXTRA
nethctrl = 32 # NPORTS*NCPUS
neq = 64 # NPORTS*NCPUS * 2 (FL, ETHCTRL/TX)
nexactf = 16 # (NPORTS *(no of snmc grp + 1 hw mac) + 1 anmc grp)) rounded to 16.
cmask = all # access to all channels
pmask = all # access to all four ports ...
nserver = 16
nhash = 2048
tp_l2t = 1020
nclip = 64
protocol = iscsi_initiator_fofld
tp_ddp_iscsi = 2
iscsi_ntask = 2048
iscsi_nsess = 2048
iscsi_nconn_per_session = 1
iscsi_ninitiator_instance = 64
[function "6"]
wx_caps = all # write/execute permissions for all commands
r_caps = all # read permissions for all commands
nvi = 4 # NPORTS
niqflint = 34 # NPORTS*NCPUS + NMSIX_EXTRA
nethctrl = 32 # NPORTS*NCPUS
neq = 66 # NPORTS*NCPUS * 2 (FL, ETHCTRL/TX) + 2 (EXTRA)
nexactf = 32 # NPORTS + adding 28 exact entries for FCoE
# which is OK since < MIN(SUM PF0..3, PF4)
# and we never load PF0..3 and PF4 concurrently
cmask = all # access to all channels
pmask = all # access to all four ports ...
nhash = 2048
tp_l2t = 4
protocol = fcoe_initiator
tp_ddp = 2
fcoe_nfcf = 16
fcoe_nvnp = 32
fcoe_nssn = 1024
# The following function, 1023, is not an actual PCIE function but is used to
# configure and reserve firmware internal resources that come from the global
# resource pool.
#
[function "1023"]
wx_caps = all # write/execute permissions for all commands
r_caps = all # read permissions for all commands
nvi = 4 # NVI_UNIFIED
cmask = all # access to all channels
pmask = all # access to all four ports ...
nexactf = 8 # NPORTS + DCBX +
nfilter = 16 # number of filter region entries
# For Virtual functions, we only allow NIC functionality and we only allow
# access to one port (1 << PF). Note that because of limitations in the
# Scatter Gather Engine (SGE) hardware which checks writes to VF KDOORBELL
# and GTS registers, the number of Ingress and Egress Queues must be a power
# of 2.
#
[function "0/*"] # NVF
wx_caps = 0x82 # DMAQ | VF
r_caps = 0x86 # DMAQ | VF | PORT
nvi = 1 # 1 port
niqflint = 6 # 2 "Queue Sets" + NXIQ
nethctrl = 4 # 2 "Queue Sets"
neq = 8 # 2 "Queue Sets" * 2
nexactf = 4
cmask = all # access to all channels
pmask = 0x1 # access to only one port ...
[function "1/*"] # NVF
wx_caps = 0x82 # DMAQ | VF
r_caps = 0x86 # DMAQ | VF | PORT
nvi = 1 # 1 port
niqflint = 6 # 2 "Queue Sets" + NXIQ
nethctrl = 4 # 2 "Queue Sets"
neq = 8 # 2 "Queue Sets" * 2
nexactf = 4
cmask = all # access to all channels
pmask = 0x2 # access to only one port ...
[function "2/*"] # NVF
wx_caps = 0x82 # DMAQ | VF
r_caps = 0x86 # DMAQ | VF | PORT
nvi = 1 # 1 port
niqflint = 6 # 2 "Queue Sets" + NXIQ
nethctrl = 4 # 2 "Queue Sets"
neq = 8 # 2 "Queue Sets" * 2
nexactf = 4
cmask = all # access to all channels
pmask = 0x1 # access to only one port ...
[function "3/*"] # NVF
wx_caps = 0x82 # DMAQ | VF
r_caps = 0x86 # DMAQ | VF | PORT
nvi = 1 # 1 port
niqflint = 6 # 2 "Queue Sets" + NXIQ
nethctrl = 4 # 2 "Queue Sets"
neq = 8 # 2 "Queue Sets" * 2
nexactf = 4
cmask = all # access to all channels
pmask = 0x2 # access to only one port ...
# MPS features a 196608 bytes ingress buffer that is used for ingress buffering
# for packets from the wire as well as the loopback path of the L2 switch. The
# folling params control how the buffer memory is distributed and the L2 flow
# control settings:
#
# bg_mem: %-age of mem to use for port/buffer group
# lpbk_mem: %-age of port/bg mem to use for loopback
# hwm: high watermark; bytes available when starting to send pause
# frames (in units of 0.1 MTU)
# lwm: low watermark; bytes remaining when sending 'unpause' frame
# (in inuits of 0.1 MTU)
# dwm: minimum delta between high and low watermark (in units of 100
# Bytes)
#
[port "0"]
dcb = ppp, dcbx # configure for DCB PPP and enable DCBX offload
#bg_mem = 25
#lpbk_mem = 25
hwm = 60
lwm = 15
dwm = 30
dcb_app_tlv[0] = 0x8906, ethertype, 3
dcb_app_tlv[1] = 0x8914, ethertype, 3
dcb_app_tlv[2] = 3260, socketnum, 5
[port "1"]
dcb = ppp, dcbx
#bg_mem = 25
#lpbk_mem = 25
hwm = 60
lwm = 15
dwm = 30
dcb_app_tlv[0] = 0x8906, ethertype, 3
dcb_app_tlv[1] = 0x8914, ethertype, 3
dcb_app_tlv[2] = 3260, socketnum, 5
[fini]
version = 0x1425001d
checksum = 0x14a220cd
# Total resources used by above allocations:
# Virtual Interfaces: 104
# Ingress Queues/w Free Lists and Interrupts: 526
# Egress Queues: 702
# MPS TCAM Entries: 336
# MSI-X Vectors: 736
# Virtual Functions: 64
AnonSec - 2021 | Recode By D7net