|
OFF | cURL : OFF | WGET : ON | Perl : ON | Python : OFF Directory (0755) : /var/../cdrom/../home/ubuntu/ |
| Home | ☍ Command | ☍ Upload File | ☍Info Server | ☍ Buat File | ☍ Mass deface | ☍ Jumping | ☍ Config | ☍ Symlink | ☍ About |
|---|
./ 0040755 0000000 0000000 00000010000 13451554502 007722 5 ustar root root ./000-default.conf 0120777 0000000 0000000 00000000000 12615650313 020553 2../sites-available/000-default.conf ustar root root ./apache2.conf 0100644 0000000 0000000 00000016033 12640210726 012067 0 ustar root root
Include /etc/phpmyadmin/apache.conf
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See http://httpd.apache.org/docs/2.4/ for detailed information about
# the directives and /usr/share/doc/apache2/README.Debian about Debian specific
# hints.
#
#
# Summary of how the Apache 2 configuration works in Debian:
# The Apache 2 web server configuration in Debian is quite different to
# upstream's suggested way to configure the web server. This is because Debian's
# default Apache2 installation attempts to make adding and removing modules,
# virtual hosts, and extra configuration directives as flexible as possible, in
# order to make automating the changes and administering the server as easy as
# possible.
# It is split into several files forming the configuration hierarchy outlined
# below, all located in the /etc/apache2/ directory:
#
# /etc/apache2/
# |-- apache2.conf
# | `-- ports.conf
# |-- mods-enabled
# | |-- *.load
# | `-- *.conf
# |-- conf-enabled
# | `-- *.conf
# `-- sites-enabled
# `-- *.conf
#
#
# * apache2.conf is the main configuration file (this file). It puts the pieces
# together by including all remaining configuration files when starting up the
# web server.
#
# * ports.conf is always included from the main configuration file. It is
# supposed to determine listening ports for incoming connections which can be
# customized anytime.
#
# * Configuration files in the mods-enabled/, conf-enabled/ and sites-enabled/
# directories contain particular configuration snippets which manage modules,
# global configuration fragments, or virtual host configurations,
# respectively.
#
# They are activated by symlinking available configuration files from their
# respective *-available/ counterparts. These should be managed by using our
# helpers a2enmod/a2dismod, a2ensite/a2dissite and a2enconf/a2disconf. See
# their respective man pages for detailed information.
#
# * The binary is called apache2. Due to the use of environment variables, in
# the default configuration, apache2 needs to be started/stopped with
# /etc/init.d/apache2 or apache2ctl. Calling /usr/bin/apache2 directly will not
# work with the default configuration.
# Global configuration
#
#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# NOTE! If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the Mutex documentation (available
# at <URL:http://httpd.apache.org/docs/2.4/mod/core.html#mutex>);
# you will save yourself a lot of trouble.
#
# Do NOT add a slash at the end of the directory path.
#
#ServerRoot "/etc/apache2"
#
# The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
#
Mutex file:${APACHE_LOCK_DIR} default
#
# PidFile: The file in which the server should record its process
# identification number when it starts.
# This needs to be set in /etc/apache2/envvars
#
PidFile ${APACHE_PID_FILE}
#
# Timeout: The number of seconds before receives and sends time out.
#
Timeout 300
#
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive On
#
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 100
#
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
#
KeepAliveTimeout 5
# These need to be set in /etc/apache2/envvars
User ${APACHE_RUN_USER}
Group ${APACHE_RUN_GROUP}
#
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
#
HostnameLookups Off
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog ${APACHE_LOG_DIR}/error.log
#
# LogLevel: Control the severity of messages logged to the error_log.
# Available values: trace8, ..., trace1, debug, info, notice, warn,
# error, crit, alert, emerg.
# It is also possible to configure the log level for particular modules, e.g.
# "LogLevel info ssl:warn"
#
LogLevel warn
# Include module configuration:
IncludeOptional mods-enabled/*.load
IncludeOptional mods-enabled/*.conf
# Include list of ports to listen on
Include ports.conf
# Sets the default security model of the Apache2 HTTPD server. It does
# not allow access to the root filesystem outside of /usr/share and /var/www.
# The former is used by web applications packaged in Debian,
# the latter may be used for local directories served by the web server. If
# your system is serving content from a sub-directory in /srv you must allow
# access here, or in any related virtual host.
<Directory />
Options FollowSymLinks
AllowOverride None
Require all denied
</Directory>
<Directory /usr/share>
AllowOverride None
Require all granted
</Directory>
<Directory /var/www/>
Options Indexes FollowSymLinks
AllowOverride None
Require all granted
</Directory>
#<Directory /srv/>
# Options Indexes FollowSymLinks
# AllowOverride None
# Require all granted
#</Directory>
# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives. See also the AllowOverride
# directive.
#
AccessFileName .htaccess
#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
<FilesMatch "^\.ht">
Require all denied
</FilesMatch>
#
# The following directives define some format nicknames for use with
# a CustomLog directive.
#
# These deviate from the Common Log Format definitions in that they use %O
# (the actual bytes sent including headers) instead of %b (the size of the
# requested file), because the latter makes it impossible to detect partial
# requests.
#
# Note that the use of %{X-Forwarded-For}i instead of %h is not recommended.
# Use mod_remoteip instead.
#
LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined
LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %O" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
# Include of directories ignores editors' and dpkg's backup files,
# see README.Debian for details.
# Include generic snippets of statements
IncludeOptional conf-enabled/*.conf
# Include the virtual host configurations:
IncludeOptional sites-enabled/*.conf
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
Include /etc/apache2/conf.d/phppgadmin
./conf-available/ 0040755 0000000 0000000 00000010000 13451554502 012565 5 ustar root root ./conf-enabled/ 0040755 0000000 0000000 00000010000 12640210215 012224 5 ustar root root ./conf.d/ 0040755 0000000 0000000 00000010000 12615655331 011074 5 ustar root root ./envvars 0100644 0000000 0000000 00000003366 12261546711 011336 0 ustar root root # envvars - default environment variables for apache2ctl
# this won't be correct after changing uid
unset HOME
# for supporting multiple apache2 instances
if [ "${APACHE_CONFDIR##/etc/apache2-}" != "${APACHE_CONFDIR}" ] ; then
SUFFIX="-${APACHE_CONFDIR##/etc/apache2-}"
else
SUFFIX=
fi
# Since there is no sane way to get the parsed apache2 config in scripts, some
# settings are defined via environment variables and then used in apache2ctl,
# /etc/init.d/apache2, /etc/logrotate.d/apache2, etc.
export APACHE_RUN_USER=www-data
export APACHE_RUN_GROUP=www-data
# temporary state file location. This might be changed to /run in Wheezy+1
export APACHE_PID_FILE=/var/run/apache2/apache2$SUFFIX.pid
export APACHE_RUN_DIR=/var/run/apache2$SUFFIX
export APACHE_LOCK_DIR=/var/lock/apache2$SUFFIX
# Only /var/log/apache2 is handled by /etc/logrotate.d/apache2.
export APACHE_LOG_DIR=/var/log/apache2$SUFFIX
## The locale used by some modules like mod_dav
export LANG=C
## Uncomment the following line to use the system default locale instead:
#. /etc/default/locale
export LANG
## The command to get the status for 'apache2ctl status'.
## Some packages providing 'www-browser' need '--dump' instead of '-dump'.
#export APACHE_LYNX='www-browser -dump'
## If you need a higher file descriptor limit, uncomment and adjust the
## following line (default is 8192):
#APACHE_ULIMIT_MAX_FILES='ulimit -n 65536'
## If you would like to pass arguments to the web server, add them below
## to the APACHE_ARGUMENTS environment.
#export APACHE_ARGUMENTS=''
## Enable the debug mode for maintainer scripts.
## This will produce a verbose output on package installations of web server modules and web application
## installations which interact with Apache
#export APACHE2_MAINTSCRIPT_DEBUG=1
./magic 0100644 0000000 0000000 00000074527 12261546711 010741 0 ustar root root # Magic data for mod_mime_magic (originally for file(1) command)
#
# The format is 4-5 columns:
# Column #1: byte number to begin checking from, ">" indicates continuation
# Column #2: type of data to match
# Column #3: contents of data to match
# Column #4: MIME type of result
# Column #5: MIME encoding of result (optional)
#------------------------------------------------------------------------------
# Localstuff: file(1) magic for locally observed files
# Add any locally observed files here.
# Real Audio (Magic .ra\0375)
0 belong 0x2e7261fd audio/x-pn-realaudio
0 string .RMF application/vnd.rn-realmedia
#video/x-pn-realvideo
#video/vnd.rn-realvideo
#application/vnd.rn-realmedia
# sigh, there are many mimes for that but the above are the most common.
# Taken from magic, converted to magic.mime
# mime types according to http://www.geocities.com/nevilo/mod.htm:
# audio/it .it
# audio/x-zipped-it .itz
# audio/xm fasttracker modules
# audio/x-s3m screamtracker modules
# audio/s3m screamtracker modules
# audio/x-zipped-mod mdz
# audio/mod mod
# audio/x-mod All modules (mod, s3m, 669, mtm, med, xm, it, mdz, stm, itz, xmz, s3z)
# Taken from loader code from mikmod version 2.14
# by Steve McIntyre (stevem@chiark.greenend.org.uk)
# <doj@cubic.org> added title printing on 2003-06-24
0 string MAS_UTrack_V00
>14 string >/0 audio/x-mod
#audio/x-tracker-module
#0 string UN05 MikMod UNI format module sound data
0 string Extended\ Module: audio/x-mod
#audio/x-tracker-module
##>17 string >\0 Title: "%s"
21 string/c \!SCREAM! audio/x-mod
#audio/x-screamtracker-module
21 string BMOD2STM audio/x-mod
#audio/x-screamtracker-module
1080 string M.K. audio/x-mod
#audio/x-protracker-module
#>0 string >\0 Title: "%s"
1080 string M!K! audio/x-mod
#audio/x-protracker-module
#>0 string >\0 Title: "%s"
1080 string FLT4 audio/x-mod
#audio/x-startracker-module
#>0 string >\0 Title: "%s"
1080 string FLT8 audio/x-mod
#audio/x-startracker-module
#>0 string >\0 Title: "%s"
1080 string 4CHN audio/x-mod
#audio/x-fasttracker-module
#>0 string >\0 Title: "%s"
1080 string 6CHN audio/x-mod
#audio/x-fasttracker-module
#>0 string >\0 Title: "%s"
1080 string 8CHN audio/x-mod
#audio/x-fasttracker-module
#>0 string >\0 Title: "%s"
1080 string CD81 audio/x-mod
#audio/x-oktalyzer-tracker-module
#>0 string >\0 Title: "%s"
1080 string OKTA audio/x-mod
#audio/x-oktalyzer-tracker-module
#>0 string >\0 Title: "%s"
# Not good enough.
#1082 string CH
#>1080 string >/0 %.2s-channel Fasttracker "oktalyzer" module sound data
1080 string 16CN audio/x-mod
#audio/x-taketracker-module
#>0 string >\0 Title: "%s"
1080 string 32CN audio/x-mod
#audio/x-taketracker-module
#>0 string >\0 Title: "%s"
# Impuse tracker module (it)
0 string IMPM audio/x-mod
#>4 string >\0 "%s"
#>40 leshort !0 compatible w/ITv%x
#>42 leshort !0 created w/ITv%x
#------------------------------------------------------------------------------
# end local stuff
#------------------------------------------------------------------------------
# xml based formats!
# svg
0 string \<?xml
# text/xml
>38 string \<\!DOCTYPE\040svg image/svg+xml
# xml
0 string \<?xml text/xml
#------------------------------------------------------------------------------
# Java
0 short 0xcafe
>2 short 0xbabe application/java
#------------------------------------------------------------------------------
# audio: file(1) magic for sound formats
#
# from Jan Nicolai Langfeldt <janl@ifi.uio.no>,
#
# Sun/NeXT audio data
0 string .snd
>12 belong 1 audio/basic
>12 belong 2 audio/basic
>12 belong 3 audio/basic
>12 belong 4 audio/basic
>12 belong 5 audio/basic
>12 belong 6 audio/basic
>12 belong 7 audio/basic
>12 belong 23 audio/x-adpcm
# DEC systems (e.g. DECstation 5000) use a variant of the Sun/NeXT format
# that uses little-endian encoding and has a different magic number
# (0x0064732E in little-endian encoding).
0 lelong 0x0064732E
>12 lelong 1 audio/x-dec-basic
>12 lelong 2 audio/x-dec-basic
>12 lelong 3 audio/x-dec-basic
>12 lelong 4 audio/x-dec-basic
>12 lelong 5 audio/x-dec-basic
>12 lelong 6 audio/x-dec-basic
>12 lelong 7 audio/x-dec-basic
# compressed (G.721 ADPCM)
>12 lelong 23 audio/x-dec-adpcm
# Bytes 0-3 of AIFF, AIFF-C, & 8SVX audio files are "FORM"
# AIFF audio data
8 string AIFF audio/x-aiff
# AIFF-C audio data
8 string AIFC audio/x-aiff
# IFF/8SVX audio data
8 string 8SVX audio/x-aiff
# Creative Labs AUDIO stuff
# Standard MIDI data
0 string MThd audio/unknown
#>9 byte >0 (format %d)
#>11 byte >1 using %d channels
# Creative Music (CMF) data
0 string CTMF audio/unknown
# SoundBlaster instrument data
0 string SBI audio/unknown
# Creative Labs voice data
0 string Creative\ Voice\ File audio/unknown
## is this next line right? it came this way...
#>19 byte 0x1A
#>23 byte >0 - version %d
#>22 byte >0 \b.%d
# [GRR 950115: is this also Creative Labs? Guessing that first line
# should be string instead of unknown-endian long...]
#0 long 0x4e54524b MultiTrack sound data
#0 string NTRK MultiTrack sound data
#>4 long x - version %ld
# Microsoft WAVE format (*.wav)
# [GRR 950115: probably all of the shorts and longs should be leshort/lelong]
# Microsoft RIFF
0 string RIFF
# - WAVE format
>8 string WAVE audio/x-wav
>8 string/B AVI video/x-msvideo
#
>8 string CDRA image/x-coreldraw
# AAC (aka MPEG-2 NBC)
0 beshort&0xfff6 0xfff0 audio/X-HX-AAC-ADTS
0 string ADIF audio/X-HX-AAC-ADIF
0 beshort&0xffe0 0x56e0 audio/MP4A-LATM
0 beshort 0x4De1 audio/MP4A-LATM
# MPEG Layer 3 sound files
0 beshort&0xfffe =0xfffa audio/mpeg
#MP3 with ID3 tag
0 string ID3 audio/mpeg
# Ogg/Vorbis
0 string OggS application/ogg
#------------------------------------------------------------------------------
# c-lang: file(1) magic for C programs or various scripts
#
# XPM icons (Greg Roelofs, newt@uchicago.edu)
# ideally should go into "images", but entries below would tag XPM as C source
0 string /*\ XPM image/x-xpmi 7bit
# 3DS (3d Studio files)
#16 beshort 0x3d3d image/x-3ds
# this first will upset you if you're a PL/1 shop... (are there any left?)
# in which case rm it; ascmagic will catch real C programs
# C or REXX program text
#0 string /* text/x-c
# C++ program text
#0 string // text/x-c++
#------------------------------------------------------------------------------
# commands: file(1) magic for various shells and interpreters
#
#0 string :\ shell archive or commands for antique kernel text
0 string #!/bin/sh application/x-shellscript
0 string #!\ /bin/sh application/x-shellscript
0 string #!/bin/csh application/x-shellscript
0 string #!\ /bin/csh application/x-shellscript
# korn shell magic, sent by George Wu, gwu@clyde.att.com
0 string #!/bin/ksh application/x-shellscript
0 string #!\ /bin/ksh application/x-shellscript
0 string #!/bin/tcsh application/x-shellscript
0 string #!\ /bin/tcsh application/x-shellscript
0 string #!/usr/local/tcsh application/x-shellscript
0 string #!\ /usr/local/tcsh application/x-shellscript
0 string #!/usr/local/bin/tcsh application/x-shellscript
0 string #!\ /usr/local/bin/tcsh application/x-shellscript
# bash shell magic, from Peter Tobias (tobias@server.et-inf.fho-emden.de)
0 string #!/bin/bash application/x-shellscript
0 string #!\ /bin/bash application/x-shellscript
0 string #!/usr/local/bin/bash application/x-shellscript
0 string #!\ /usr/local/bin/bash application/x-shellscript
#
# zsh/ash/ae/nawk/gawk magic from cameron@cs.unsw.oz.au (Cameron Simpson)
0 string #!/bin/zsh application/x-shellscript
0 string #!/usr/bin/zsh application/x-shellscript
0 string #!/usr/local/bin/zsh application/x-shellscript
0 string #!\ /usr/local/bin/zsh application/x-shellscript
0 string #!/usr/local/bin/ash application/x-shellscript
0 string #!\ /usr/local/bin/ash application/x-shellscript
#0 string #!/usr/local/bin/ae Neil Brown's ae
#0 string #!\ /usr/local/bin/ae Neil Brown's ae
0 string #!/bin/nawk application/x-nawk
0 string #!\ /bin/nawk application/x-nawk
0 string #!/usr/bin/nawk application/x-nawk
0 string #!\ /usr/bin/nawk application/x-nawk
0 string #!/usr/local/bin/nawk application/x-nawk
0 string #!\ /usr/local/bin/nawk application/x-nawk
0 string #!/bin/gawk application/x-gawk
0 string #!\ /bin/gawk application/x-gawk
0 string #!/usr/bin/gawk application/x-gawk
0 string #!\ /usr/bin/gawk application/x-gawk
0 string #!/usr/local/bin/gawk application/x-gawk
0 string #!\ /usr/local/bin/gawk application/x-gawk
#
0 string #!/bin/awk application/x-awk
0 string #!\ /bin/awk application/x-awk
0 string #!/usr/bin/awk application/x-awk
0 string #!\ /usr/bin/awk application/x-awk
# update to distinguish from *.vcf files by Joerg Jenderek: joerg dot jenderek at web dot de
#0 regex BEGIN[[:space:]]*[{] application/x-awk
# For Larry Wall's perl language. The ``eval'' line recognizes an
# outrageously clever hack for USG systems.
# Keith Waclena <keith@cerberus.uchicago.edu>
0 string #!/bin/perl application/x-perl
0 string #!\ /bin/perl application/x-perl
0 string eval\ "exec\ /bin/perl application/x-perl
0 string #!/usr/bin/perl application/x-perl
0 string #!\ /usr/bin/perl application/x-perl
0 string eval\ "exec\ /usr/bin/perl application/x-perl
0 string #!/usr/local/bin/perl application/x-perl
0 string #!\ /usr/local/bin/perl application/x-perl
0 string eval\ "exec\ /usr/local/bin/perl application/x-perl
#------------------------------------------------------------------------------
# compress: file(1) magic for pure-compression formats (no archives)
#
# compress, gzip, pack, compact, huf, squeeze, crunch, freeze, yabba, whap, etc.
#
# Formats for various forms of compressed data
# Formats for "compress" proper have been moved into "compress.c",
# because it tries to uncompress it to figure out what's inside.
# standard unix compress
#0 string \037\235 application/x-compress
# gzip (GNU zip, not to be confused with [Info-ZIP/PKWARE] zip archiver)
#0 string \037\213 application/x-gzip
0 string PK\003\004 application/x-zip
# RAR archiver (Greg Roelofs, newt@uchicago.edu)
0 string Rar! application/x-rar
# According to gzip.h, this is the correct byte order for packed data.
0 string \037\036 application/octet-stream
#
# This magic number is byte-order-independent.
#
0 short 017437 application/octet-stream
# XXX - why *two* entries for "compacted data", one of which is
# byte-order independent, and one of which is byte-order dependent?
#
# compacted data
0 short 0x1fff application/octet-stream
0 string \377\037 application/octet-stream
# huf output
0 short 0145405 application/octet-stream
# Squeeze and Crunch...
# These numbers were gleaned from the Unix versions of the programs to
# handle these formats. Note that I can only uncrunch, not crunch, and
# I didn't have a crunched file handy, so the crunch number is untested.
# Keith Waclena <keith@cerberus.uchicago.edu>
#0 leshort 0x76FF squeezed data (CP/M, DOS)
#0 leshort 0x76FE crunched data (CP/M, DOS)
# Freeze
#0 string \037\237 Frozen file 2.1
#0 string \037\236 Frozen file 1.0 (or gzip 0.5)
# lzh?
#0 string \037\240 LZH compressed data
257 string ustar\0 application/x-tar posix
257 string ustar\040\040\0 application/x-tar gnu
0 short 070707 application/x-cpio
0 short 0143561 application/x-cpio swapped
0 string =<ar> application/x-archive
0 string \!<arch> application/x-archive
>8 string debian application/x-debian-package
#------------------------------------------------------------------------------
#
# RPM: file(1) magic for Red Hat Packages Erik Troan (ewt@redhat.com)
#
0 beshort 0xedab
>2 beshort 0xeedb application/x-rpm
0 lelong&0x8080ffff 0x0000081a application/x-arc lzw
0 lelong&0x8080ffff 0x0000091a application/x-arc squashed
0 lelong&0x8080ffff 0x0000021a application/x-arc uncompressed
0 lelong&0x8080ffff 0x0000031a application/x-arc packed
0 lelong&0x8080ffff 0x0000041a application/x-arc squeezed
0 lelong&0x8080ffff 0x0000061a application/x-arc crunched
0 leshort 0xea60 application/x-arj
# LHARC/LHA archiver (Greg Roelofs, newt@uchicago.edu)
2 string -lh0- application/x-lharc lh0
2 string -lh1- application/x-lharc lh1
2 string -lz4- application/x-lharc lz4
2 string -lz5- application/x-lharc lz5
# [never seen any but the last; -lh4- reported in comp.compression:]
2 string -lzs- application/x-lha lzs
2 string -lh\ - application/x-lha lh
2 string -lhd- application/x-lha lhd
2 string -lh2- application/x-lha lh2
2 string -lh3- application/x-lha lh3
2 string -lh4- application/x-lha lh4
2 string -lh5- application/x-lha lh5
2 string -lh6- application/x-lha lh6
2 string -lh7- application/x-lha lh7
# Shell archives
10 string #\ This\ is\ a\ shell\ archive application/octet-stream x-shell
#------------------------------------------------------------------------------
# frame: file(1) magic for FrameMaker files
#
# This stuff came on a FrameMaker demo tape, most of which is
# copyright, but this file is "published" as witness the following:
#
0 string \<MakerFile application/x-frame
0 string \<MIFFile application/x-frame
0 string \<MakerDictionary application/x-frame
0 string \<MakerScreenFon application/x-frame
0 string \<MML application/x-frame
0 string \<Book application/x-frame
0 string \<Maker application/x-frame
#------------------------------------------------------------------------------
# html: file(1) magic for HTML (HyperText Markup Language) docs
#
# from Daniel Quinlan <quinlan@yggdrasil.com>
#
0 string/cB \<!DOCTYPE\ html text/html
0 string/cb \<head text/html
0 string/cb \<title text/html
0 string/bc \<html text/html
0 string \<!-- text/html
0 string/c \<h1 text/html
0 string \<?xml text/xml
#------------------------------------------------------------------------------
# images: file(1) magic for image formats (see also "c-lang" for XPM bitmaps)
#
# originally from jef@helios.ee.lbl.gov (Jef Poskanzer),
# additions by janl@ifi.uio.no as well as others. Jan also suggested
# merging several one- and two-line files into here.
#
# XXX - byte order for GIF and TIFF fields?
# [GRR: TIFF allows both byte orders; GIF is probably little-endian]
#
# [GRR: what the hell is this doing in here?]
#0 string xbtoa btoa'd file
# PBMPLUS
# PBM file
0 string P1 image/x-portable-bitmap 7bit
# PGM file
0 string P2 image/x-portable-greymap 7bit
# PPM file
0 string P3 image/x-portable-pixmap 7bit
# PBM "rawbits" file
0 string P4 image/x-portable-bitmap
# PGM "rawbits" file
0 string P5 image/x-portable-greymap
# PPM "rawbits" file
0 string P6 image/x-portable-pixmap
# NIFF (Navy Interchange File Format, a modification of TIFF)
# [GRR: this *must* go before TIFF]
0 string IIN1 image/x-niff
# TIFF and friends
# TIFF file, big-endian
0 string MM image/tiff
# TIFF file, little-endian
0 string II image/tiff
# possible GIF replacements; none yet released!
# (Greg Roelofs, newt@uchicago.edu)
#
# GRR 950115: this was mine ("Zip GIF"):
# ZIF image (GIF+deflate alpha)
0 string GIF94z image/unknown
#
# GRR 950115: this is Jeremy Wohl's Free Graphics Format (better):
# FGF image (GIF+deflate beta)
0 string FGF95a image/unknown
#
# GRR 950115: this is Thomas Boutell's Portable Bitmap Format proposal
# (best; not yet implemented):
# PBF image (deflate compression)
0 string PBF image/unknown
# GIF
0 string GIF image/gif
# JPEG images
0 beshort 0xffd8 image/jpeg
# PC bitmaps (OS/2, Windoze BMP files) (Greg Roelofs, newt@uchicago.edu)
0 string BM image/x-ms-bmp
#>14 byte 12 (OS/2 1.x format)
#>14 byte 64 (OS/2 2.x format)
#>14 byte 40 (Windows 3.x format)
#0 string IC icon
#0 string PI pointer
#0 string CI color icon
#0 string CP color pointer
#0 string BA bitmap array
# CDROM Filesystems
32769 string CD001 application/x-iso9660
# Newer StuffIt archives (grant@netbsd.org)
0 string StuffIt application/x-stuffit
#>162 string >0 : %s
# BinHex is the Macintosh ASCII-encoded file format (see also "apple")
# Daniel Quinlan, quinlan@yggdrasil.com
11 string must\ be\ converted\ with\ BinHex\ 4 application/mac-binhex40
##>41 string x \b, version %.3s
#------------------------------------------------------------------------------
# lisp: file(1) magic for lisp programs
#
# various lisp types, from Daniel Quinlan (quinlan@yggdrasil.com)
0 string ;; text/plain 8bit
# Emacs 18 - this is always correct, but not very magical.
0 string \012( application/x-elc
# Emacs 19
0 string ;ELC\023\000\000\000 application/x-elc
#------------------------------------------------------------------------------
# mail.news: file(1) magic for mail and news
#
# There are tests to ascmagic.c to cope with mail and news.
0 string Relay-Version: message/rfc822 7bit
0 string #!\ rnews message/rfc822 7bit
0 string N#!\ rnews message/rfc822 7bit
0 string Forward\ to message/rfc822 7bit
0 string Pipe\ to message/rfc822 7bit
0 string Return-Path: message/rfc822 7bit
0 string Received: message/rfc822
0 string Path: message/news 8bit
0 string Xref: message/news 8bit
0 string From: message/rfc822 7bit
0 string Article message/news 8bit
#------------------------------------------------------------------------------
# msword: file(1) magic for MS Word files
#
# Contributor claims:
# Reversed-engineered MS Word magic numbers
#
0 string \376\067\0\043 application/msword
0 string \320\317\021\340\241\261 application/msword
0 string \333\245-\0\0\0 application/msword
#------------------------------------------------------------------------------
# printer: file(1) magic for printer-formatted files
#
# PostScript
0 string %! application/postscript
0 string \004%! application/postscript
# Acrobat
# (due to clamen@cs.cmu.edu)
0 string %PDF- application/pdf
#------------------------------------------------------------------------------
# sc: file(1) magic for "sc" spreadsheet
#
38 string Spreadsheet application/x-sc
#------------------------------------------------------------------------------
# tex: file(1) magic for TeX files
#
# XXX - needs byte-endian stuff (big-endian and little-endian DVI?)
#
# From <conklin@talisman.kaleida.com>
# Although we may know the offset of certain text fields in TeX DVI
# and font files, we can't use them reliably because they are not
# zero terminated. [but we do anyway, christos]
0 string \367\002 application/x-dvi
#0 string \367\203 TeX generic font data
#0 string \367\131 TeX packed font data
#0 string \367\312 TeX virtual font data
#0 string This\ is\ TeX, TeX transcript text
#0 string This\ is\ METAFONT, METAFONT transcript text
# There is no way to detect TeX Font Metric (*.tfm) files without
# breaking them apart and reading the data. The following patterns
# match most *.tfm files generated by METAFONT or afm2tfm.
2 string \000\021 application/x-tex-tfm
2 string \000\022 application/x-tex-tfm
#>34 string >\0 (%s)
# Texinfo and GNU Info, from Daniel Quinlan (quinlan@yggdrasil.com)
0 string \\input\ texinfo text/x-texinfo
0 string This\ is\ Info\ file text/x-info
# correct TeX magic for Linux (and maybe more)
# from Peter Tobias (tobias@server.et-inf.fho-emden.de)
#
0 leshort 0x02f7 application/x-dvi
# RTF - Rich Text Format
0 string {\\rtf text/rtf
#------------------------------------------------------------------------------
# animation: file(1) magic for animation/movie formats
#
# animation formats, originally from vax@ccwf.cc.utexas.edu (VaX#n8)
# MPEG file
# MPEG sequences
0 belong 0x000001BA
>4 byte &0x40 video/mp2p
>4 byte ^0x40 video/mpeg
0 belong 0x000001BB video/mpeg
0 belong 0x000001B0 video/mp4v-es
0 belong 0x000001B5 video/mp4v-es
0 belong 0x000001B3 video/mpv
0 belong&0xFF5FFF1F 0x47400010 video/mp2t
0 belong 0x00000001
>4 byte&0x1F 0x07 video/h264
# FLI animation format
0 leshort 0xAF11 video/fli
# FLC animation format
0 leshort 0xAF12 video/flc
#
# SGI and Apple formats
# Added ISO mimes
0 string MOVI video/sgi
4 string moov video/quicktime
4 string mdat video/quicktime
4 string wide video/quicktime
4 string skip video/quicktime
4 string free video/quicktime
4 string idsc image/x-quicktime
4 string idat image/x-quicktime
4 string pckg application/x-quicktime
4 string/B jP image/jp2
4 string ftyp
>8 string isom video/mp4
>8 string mp41 video/mp4
>8 string mp42 video/mp4
>8 string/B jp2 image/jp2
>8 string 3gp video/3gpp
>8 string avc1 video/3gpp
>8 string mmp4 video/mp4
>8 string/B M4A audio/mp4
>8 string/B qt video/quicktime
# The contributor claims:
# I couldn't find a real magic number for these, however, this
# -appears- to work. Note that it might catch other files, too,
# so BE CAREFUL!
#
# Note that title and author appear in the two 20-byte chunks
# at decimal offsets 2 and 22, respectively, but they are XOR'ed with
# 255 (hex FF)! DL format SUCKS BIG ROCKS.
#
# DL file version 1 , medium format (160x100, 4 images/screen)
0 byte 1 video/unknown
0 byte 2 video/unknown
#
# Databases
#
# GDBM magic numbers
# Will be maintained as part of the GDBM distribution in the future.
# <downsj@teeny.org>
0 belong 0x13579ace application/x-gdbm
0 lelong 0x13579ace application/x-gdbm
0 string GDBM application/x-gdbm
#
0 belong 0x061561 application/x-dbm
#
# Executables
#
0 string \177ELF
>16 leshort 0 application/octet-stream
>16 leshort 1 application/x-object
>16 leshort 2 application/x-executable
>16 leshort 3 application/x-sharedlib
>16 leshort 4 application/x-coredump
>16 beshort 0 application/octet-stream
>16 beshort 1 application/x-object
>16 beshort 2 application/x-executable
>16 beshort 3 application/x-sharedlib
>16 beshort 4 application/x-coredump
#
# DOS
0 string MZ application/x-dosexec
#
# KDE
0 string [KDE\ Desktop\ Entry] application/x-kdelnk
0 string \#\ KDE\ Config\ File application/x-kdelnk
# xmcd database file for kscd
0 string \#\ xmcd text/xmcd
#------------------------------------------------------------------------------
# pkgadd: file(1) magic for SysV R4 PKG Datastreams
#
0 string #\ PaCkAgE\ DaTaStReAm application/x-svr4-package
#PNG Image Format
0 string \x89PNG image/png
# MNG Video Format, <URL:http://www.libpng.org/pub/mng/spec/>
0 string \x8aMNG video/x-mng
0 string \x8aJNG video/x-jng
#------------------------------------------------------------------------------
# Hierarchical Data Format, used to facilitate scientific data exchange
# specifications at http://hdf.ncsa.uiuc.edu/
#Hierarchical Data Format (version 4) data
0 belong 0x0e031301 application/x-hdf
#Hierarchical Data Format (version 5) data
0 string \211HDF\r\n\032 application/x-hdf
# Adobe Photoshop
0 string 8BPS image/x-photoshop
# Felix von Leitner <felix-file@fefe.de>
0 string d8:announce application/x-bittorrent
# lotus 1-2-3 document
0 belong 0x00001a00 application/x-123
0 belong 0x00000200 application/x-123
# MS Access database
4 string Standard\ Jet\ DB application/msaccess
## magic for XBase files
#0 byte 0x02
#>8 leshort >0
#>>12 leshort 0 application/x-dbf
#
#0 byte 0x03
#>8 leshort >0
#>>12 leshort 0 application/x-dbf
#
#0 byte 0x04
#>8 leshort >0
#>>12 leshort 0 application/x-dbf
#
#0 byte 0x05
#>8 leshort >0
#>>12 leshort 0 application/x-dbf
#
#0 byte 0x30
#>8 leshort >0
#>>12 leshort 0 application/x-dbf
#
#0 byte 0x43
#>8 leshort >0
#>>12 leshort 0 application/x-dbf
#
#0 byte 0x7b
#>8 leshort >0
#>>12 leshort 0 application/x-dbf
#
#0 byte 0x83
#>8 leshort >0
#>>12 leshort 0 application/x-dbf
#
#0 byte 0x8b
#>8 leshort >0
#>>12 leshort 0 application/x-dbf
#
#0 byte 0x8e
#>8 leshort >0
#>>12 leshort 0 application/x-dbf
#
#0 byte 0xb3
#>8 leshort >0
#>>12 leshort 0 application/x-dbf
#
#0 byte 0xf5
#>8 leshort >0
#>>12 leshort 0 application/x-dbf
#
#0 leshort 0x0006 application/x-dbt
# Debian has entries for the old PGP formats:
# pgp: file(1) magic for Pretty Good Privacy
# see http://lists.gnupg.org/pipermail/gnupg-devel/1999-September/016052.html
#text/PGP key public ring
0 beshort 0x9900 application/pgp
#text/PGP key security ring
0 beshort 0x9501 application/pgp
#text/PGP key security ring
0 beshort 0x9500 application/pgp
#text/PGP encrypted data
0 beshort 0xa600 application/pgp-encrypted
#text/PGP armored data
##public key block
2 string ---BEGIN\ PGP\ PUBLIC\ KEY\ BLOCK- application/pgp-keys
0 string -----BEGIN\040PGP\40MESSAGE- application/pgp
0 string -----BEGIN\040PGP\40SIGNATURE- application/pgp-signature
#
# GnuPG Magic:
#
#
#text/GnuPG key public ring
0 beshort 0x9901 application/pgp
#text/OpenPGP data
0 beshort 0x8501 application/pgp-encrypted
# flash: file(1) magic for Macromedia Flash file format
#
# See
#
# http://www.macromedia.com/software/flash/open/
#
0 string FWS
>3 byte x application/x-shockwave-flash
# The following paramaters are created for Namazu.
# <http://www.namazu.org/>
#
# 1999/08/13
#0 string \<!--\ MHonArc text/html; x-type=mhonarc
0 string BZh application/x-bzip2
# 1999/09/09
# VRML (suggested by Masao Takaku)
0 string #VRML\ V1.0\ ascii model/vrml
0 string #VRML\ V2.0\ utf8 model/vrml
#------------------------------------------------------------------------------
# ichitaro456: file(1) magic for Just System Word Processor Ichitaro
#
# Contributor kenzo-:
# Reversed-engineered JS Ichitaro magic numbers
#
0 string DOC
>43 byte 0x14 application/ichitaro4
>144 string JDASH application/ichitaro4
0 string DOC
>43 byte 0x15 application/ichitaro5
0 string DOC
>43 byte 0x16 application/ichitaro6
#------------------------------------------------------------------------------
# office97: file(1) magic for MicroSoft Office files
#
# Contributor kenzo-:
# Reversed-engineered MS Office magic numbers
#
#0 string \320\317\021\340\241\261\032\341
#>48 byte 0x1B application/excel
2080 string Microsoft\ Excel\ 5.0\ Worksheet application/excel
2114 string Biff5 application/excel
0 string \224\246\056 application/msword
0 belong 0x31be0000 application/msword
0 string PO^Q` application/msword
0 string \320\317\021\340\241\261\032\341
>546 string bjbj application/msword
>546 string jbjb application/msword
512 string R\0o\0o\0t\0\ \0E\0n\0t\0r\0y application/msword
2080 string Microsoft\ Word\ 6.0\ Document application/msword
2080 string Documento\ Microsoft\ Word\ 6 application/msword
2112 string MSWordDoc application/msword
#0 string \320\317\021\340\241\261\032\341 application/powerpoint
0 string \320\317\021\340\241\261\032\341 application/msword
0 string #\ PaCkAgE\ DaTaStReAm application/x-svr4-package
# WinNT/WinCE PE files (Warner Losh, imp@village.org)
#
128 string PE\000\000 application/octet-stream
0 string PE\000\000 application/octet-stream
# miscellaneous formats
0 string LZ application/octet-stream
# .EXE formats (Greg Roelofs, newt@uchicago.edu)
#
0 string MZ
>24 string @ application/octet-stream
0 string MZ
>30 string Copyright\ 1989-1990\ PKWARE\ Inc. application/x-zip
0 string MZ
>30 string PKLITE\ Copr. application/x-zip
0 string MZ
>36 string LHa's\ SFX application/x-lha
0 string MZ application/octet-stream
# LHA archiver
2 string -lh
>6 string - application/x-lha
# Zoo archiver
20 lelong 0xfdc4a7dc application/x-zoo
# ARC archiver
0 lelong&0x8080ffff 0x0000081a application/x-arc
0 lelong&0x8080ffff 0x0000091a application/x-arc
0 lelong&0x8080ffff 0x0000021a application/x-arc
0 lelong&0x8080ffff 0x0000031a application/x-arc
0 lelong&0x8080ffff 0x0000041a application/x-arc
0 lelong&0x8080ffff 0x0000061a application/x-arc
# Microsoft Outlook's Transport Neutral Encapsulation Format (TNEF)
0 lelong 0x223e9f78 application/ms-tnef
# From: stephane.loeuillet@tiscali.f
# http://www.djvuzone.org/
0 string AT&TFORM image/x.djvu
# Danny Milosavljevic <danny.milo@gmx.net>
# this are adrift (adventure game standard) game files, extension .taf
# depending on version magic continues with 0x93453E6139FA (V 4.0)
# 0x9445376139FA (V 3.90)
# 0x9445366139FA (V 3.80)
# this is from source (http://www.adrift.org.uk/) and I have some taf
# files, and checked them.
#0 belong 0x3C423FC9
#>4 belong 0x6A87C2CF application/x-adrift
#0 string \000\000\001\000 image/x-ico
# Quark Xpress 3 Files:
# (made the mimetype up)
0 string \0\0MMXPR3\0 application/x-quark-xpress-3
# EET archive
# From: Tilman Sauerbeck <tilman@code-monkey.de>
0 belong 0x1ee7ff00 application/x-eet
# From: Denis Knauf, via gentoo.
0 string fLaC audio/x-flac
0 string CWS application/x-shockwave-flash
# Gnumeric spreadsheet
# This entry is only semi-helpful, as Gnumeric compresses its files, so
# they will ordinarily reported as "compressed", but at least -z helps
39 string =<gmr:Workbook application/x-gnumeric
./mods-available/ 0040755 0000000 0000000 00000030000 13457765512 012617 5 ustar root root ./mods-enabled/ 0040755 0000000 0000000 00000010000 12656375541 012266 5 ustar root root ./ports.conf 0100644 0000000 0000000 00000000500 12262777736 011746 0 ustar root root # If you just change the port or add more ports here, you will likely also
# have to change the VirtualHost statement in
# /etc/apache2/sites-enabled/000-default.conf
Listen 80
<IfModule ssl_module>
Listen 443
</IfModule>
<IfModule mod_gnutls.c>
Listen 443
</IfModule>
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
./sites-available/ 0040755 0000000 0000000 00000010000 14046241702 012763 5 ustar root root ./sites-enabled/ 0040755 0000000 0000000 00000010000 14046241702 012435 5 ustar root root ./mods-available/access_compat.load 0100644 0000000 0000000 00000000144 12262777736 016261 0 ustar root root # Depends: authn_core
LoadModule access_compat_module /usr/lib/apache2/modules/mod_access_compat.so
./mods-available/actions.conf 0100644 0000000 0000000 00000000571 12261546711 015111 0 ustar root root # a2enmod-note: needs-configuration
#
# Action lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
#
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
./mods-available/actions.load 0100644 0000000 0000000 00000000102 12261546711 015071 0 ustar root root LoadModule actions_module /usr/lib/apache2/modules/mod_actions.so
./mods-available/alias.conf 0100644 0000000 0000000 00000001513 12261546711 014537 0 ustar root root <IfModule alias_module>
# Aliases: Add here as many aliases as you need (with no limit). The format is
# Alias fakename realname
#
# Note that if you include a trailing / on fakename then the server will
# require it to be present in the URL. So "/icons" isn't aliased in this
# example, only "/icons/". If the fakename is slash-terminated, then the
# realname must also be slash terminated, and if the fakename omits the
# trailing slash, the realname must also omit it.
#
# We include the /icons/ alias for FancyIndexed directory listings. If
# you do not use FancyIndexing, you may comment this out.
Alias /icons/ "/usr/share/apache2/icons/"
<Directory "/usr/share/apache2/icons">
Options FollowSymlinks
AllowOverride None
Require all granted
</Directory>
</IfModule>
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
./mods-available/alias.load 0100644 0000000 0000000 00000000076 12261546711 014534 0 ustar root root LoadModule alias_module /usr/lib/apache2/modules/mod_alias.so
./mods-available/allowmethods.load 0100644 0000000 0000000 00000000114 12261546711 016136 0 ustar root root LoadModule allowmethods_module /usr/lib/apache2/modules/mod_allowmethods.so
./mods-available/asis.load 0100644 0000000 0000000 00000000114 12261546711 014373 0 ustar root root # Depends: mime
LoadModule asis_module /usr/lib/apache2/modules/mod_asis.so
./mods-available/auth_basic.load 0100644 0000000 0000000 00000000136 12261546711 015542 0 ustar root root # Depends: authn_core
LoadModule auth_basic_module /usr/lib/apache2/modules/mod_auth_basic.so
./mods-available/auth_digest.load 0100644 0000000 0000000 00000000140 12261546711 015733 0 ustar root root # Depends: authn_core
LoadModule auth_digest_module /usr/lib/apache2/modules/mod_auth_digest.so
./mods-available/auth_form.load 0100644 0000000 0000000 00000000144 12261546711 015423 0 ustar root root # Depends: session authn_core
LoadModule auth_form_module /usr/lib/apache2/modules/mod_auth_form.so
./mods-available/authn_anon.load 0100644 0000000 0000000 00000000110 12261546711 015562 0 ustar root root LoadModule authn_anon_module /usr/lib/apache2/modules/mod_authn_anon.so
./mods-available/authn_core.load 0100644 0000000 0000000 00000000110 12261546711 015557 0 ustar root root LoadModule authn_core_module /usr/lib/apache2/modules/mod_authn_core.so
./mods-available/authn_dbd.load 0100644 0000000 0000000 00000000125 12261546711 015366 0 ustar root root # Depends: dbd
LoadModule authn_dbd_module /usr/lib/apache2/modules/mod_authn_dbd.so
./mods-available/authn_dbm.load 0100644 0000000 0000000 00000000106 12261546711 015376 0 ustar root root LoadModule authn_dbm_module /usr/lib/apache2/modules/mod_authn_dbm.so
./mods-available/authn_file.load 0100644 0000000 0000000 00000000110 12261546711 015546 0 ustar root root LoadModule authn_file_module /usr/lib/apache2/modules/mod_authn_file.so
./mods-available/authn_socache.load 0100644 0000000 0000000 00000000116 12261546711 016242 0 ustar root root LoadModule authn_socache_module /usr/lib/apache2/modules/mod_authn_socache.so
./mods-available/authnz_ldap.load 0100644 0000000 0000000 00000000132 12261546711 015745 0 ustar root root # Depends: ldap
LoadModule authnz_ldap_module /usr/lib/apache2/modules/mod_authnz_ldap.so
./mods-available/authz_core.load 0100644 0000000 0000000 00000000110 12261546711 015573 0 ustar root root LoadModule authz_core_module /usr/lib/apache2/modules/mod_authz_core.so
./mods-available/authz_dbd.load 0100644 0000000 0000000 00000000140 12261546711 015377 0 ustar root root # Depends: dbd authz_core
LoadModule authz_dbd_module /usr/lib/apache2/modules/mod_authz_dbd.so
./mods-available/authz_dbm.load 0100644 0000000 0000000 00000000134 12261546711 015413 0 ustar root root # Depends: authz_core
LoadModule authz_dbm_module /usr/lib/apache2/modules/mod_authz_dbm.so
./mods-available/authz_groupfile.load 0100644 0000000 0000000 00000000150 12261546711 016643 0 ustar root root # Depends: authz_core
LoadModule authz_groupfile_module /usr/lib/apache2/modules/mod_authz_groupfile.so
./mods-available/authz_host.load 0100644 0000000 0000000 00000000136 12261546711 015630 0 ustar root root # Depends: authz_core
LoadModule authz_host_module /usr/lib/apache2/modules/mod_authz_host.so
./mods-available/authz_owner.load 0100644 0000000 0000000 00000000112 12261546711 015777 0 ustar root root LoadModule authz_owner_module /usr/lib/apache2/modules/mod_authz_owner.so
./mods-available/authz_user.load 0100644 0000000 0000000 00000000136 12261546711 015631 0 ustar root root # Depends: authz_core
LoadModule authz_user_module /usr/lib/apache2/modules/mod_authz_user.so
./mods-available/autoindex.conf 0100644 0000000 0000000 00000006456 12261546711 015461 0 ustar root root <IfModule mod_autoindex.c>
# Directives controlling the display of server-generated directory listings.
#
# IndexOptions: Controls the appearance of server-generated directory
# listings.
# Remove/replace the "Charset=UTF-8" if you don't use UTF-8 for your filenames.
IndexOptions FancyIndexing VersionSort HTMLTable NameWidth=* DescriptionWidth=* Charset=UTF-8
#
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions. These are only displayed for
# FancyIndexed directories.
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip x-bzip2
AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
# It's a suffix rule, so simply matching "core" matches "score" as well !
AddIcon /icons/bomb.gif /core
AddIcon (SND,/icons/sound2.gif) .ogg
AddIcon (VID,/icons/movie.gif) .ogm
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
# Default icons for OpenDocument format
AddIcon /icons/odf6odt-20x22.png .odt
AddIcon /icons/odf6ods-20x22.png .ods
AddIcon /icons/odf6odp-20x22.png .odp
AddIcon /icons/odf6odg-20x22.png .odg
AddIcon /icons/odf6odc-20x22.png .odc
AddIcon /icons/odf6odf-20x22.png .odf
AddIcon /icons/odf6odb-20x22.png .odb
AddIcon /icons/odf6odi-20x22.png .odi
AddIcon /icons/odf6odm-20x22.png .odm
AddIcon /icons/odf6ott-20x22.png .ott
AddIcon /icons/odf6ots-20x22.png .ots
AddIcon /icons/odf6otp-20x22.png .otp
AddIcon /icons/odf6otg-20x22.png .otg
AddIcon /icons/odf6otc-20x22.png .otc
AddIcon /icons/odf6otf-20x22.png .otf
AddIcon /icons/odf6oti-20x22.png .oti
AddIcon /icons/odf6oth-20x22.png .oth
#
# DefaultIcon is which icon to show for files which do not have an icon
# explicitly set.
DefaultIcon /icons/unknown.gif
#
# AddDescription allows you to place a short description after a file in
# server-generated indexes. These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz
#
# ReadmeName is the name of the README file the server will look for by
# default, and append to directory listings.
#
# HeaderName is the name of a file which should be prepended to
# directory indexes
ReadmeName README.html
HeaderName HEADER.html
#
# IndexIgnore is a set of filenames which directory indexing should ignore
# and not include in the listing. Shell-style wildcarding is permitted.
IndexIgnore .??* *~ *# RCS CVS *,v *,t
</IfModule>
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
./mods-available/autoindex.load 0100644 0000000 0000000 00000000106 12261546711 015435 0 ustar root root LoadModule autoindex_module /usr/lib/apache2/modules/mod_autoindex.so
./mods-available/buffer.load 0100644 0000000 0000000 00000000100 12261546711 014700 0 ustar root root LoadModule buffer_module /usr/lib/apache2/modules/mod_buffer.so
./mods-available/cache.load 0100644 0000000 0000000 00000000076 12261546711 014506 0 ustar root root LoadModule cache_module /usr/lib/apache2/modules/mod_cache.so
./mods-available/cache_disk.conf 0100644 0000000 0000000 00000001571 12261546711 015527 0 ustar root root <IfModule mod_cache_disk.c>
# cache cleaning is done by htcacheclean, which can be configured in
# /etc/default/apache2
#
# For further information, see the comments in that file,
# /usr/share/doc/apache2/README.Debian, and the htcacheclean(8)
# man page.
# This path must be the same as the one in /etc/default/apache2
CacheRoot /var/cache/apache2/mod_cache_disk
# This will also cache local documents. It usually makes more sense to
# put this into the configuration for just one virtual host.
#CacheEnable disk /
# The result of CacheDirLevels * CacheDirLength must not be higher than
# 20. Moreover, pay attention on file system limits. Some file systems
# do not support more than a certain number of inodes and
# subdirectories (e.g. 32000 for ext3)
CacheDirLevels 2
CacheDirLength 1
</IfModule>
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
./mods-available/cache_disk.load 0100644 0000000 0000000 00000000131 12261546711 015510 0 ustar root root # Depends: cache
LoadModule cache_disk_module /usr/lib/apache2/modules/mod_cache_disk.so
./mods-available/cache_socache.load 0100644 0000000 0000000 00000000137 12261546711 016171 0 ustar root root # Depends: cache
LoadModule cache_socache_module /usr/lib/apache2/modules/mod_cache_socache.so
./mods-available/cgi.load 0100644 0000000 0000000 00000000072 12261546711 014201 0 ustar root root LoadModule cgi_module /usr/lib/apache2/modules/mod_cgi.so
./mods-available/cgid.conf 0100644 0000000 0000000 00000000163 12261546711 014354 0 ustar root root # Socket for cgid communication
ScriptSock ${APACHE_RUN_DIR}/cgisock
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
./mods-available/cgid.load 0100644 0000000 0000000 00000000074 12261546711 014347 0 ustar root root LoadModule cgid_module /usr/lib/apache2/modules/mod_cgid.so
./mods-available/charset_lite.load 0100644 0000000 0000000 00000000114 12261546711 016102 0 ustar root root LoadModule charset_lite_module /usr/lib/apache2/modules/mod_charset_lite.so
./mods-available/data.load 0100644 0000000 0000000 00000000074 12261546711 014352 0 ustar root root LoadModule data_module /usr/lib/apache2/modules/mod_data.so
./mods-available/dav.load 0100644 0000000 0000000 00000000072 12261546711 014211 0 ustar root root LoadModule dav_module /usr/lib/apache2/modules/mod_dav.so
./mods-available/dav_fs.conf 0100644 0000000 0000000 00000000123 12261546711 014704 0 ustar root root DAVLockDB ${APACHE_LOCK_DIR}/DAVLock
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
./mods-available/dav_fs.load 0100644 0000000 0000000 00000000117 12261546711 014701 0 ustar root root # Depends: dav
LoadModule dav_fs_module /usr/lib/apache2/modules/mod_dav_fs.so
./mods-available/dav_lock.load 0100644 0000000 0000000 00000000104 12261546711 015215 0 ustar root root LoadModule dav_lock_module /usr/lib/apache2/modules/mod_dav_lock.so
./mods-available/dbd.load 0100644 0000000 0000000 00000000072 12261546711 014170 0 ustar root root LoadModule dbd_module /usr/lib/apache2/modules/mod_dbd.so
./mods-available/deflate.conf 0100644 0000000 0000000 00000001012 12261546711 015044 0 ustar root root <IfModule mod_deflate.c>
<IfModule mod_filter.c>
# these are known to be safe with MSIE 6
AddOutputFilterByType DEFLATE text/html text/plain text/xml
# everything else may cause problems with MSIE 6
AddOutputFilterByType DEFLATE text/css
AddOutputFilterByType DEFLATE application/x-javascript application/javascript application/ecmascript
AddOutputFilterByType DEFLATE application/rss+xml
AddOutputFilterByType DEFLATE application/xml
</IfModule>
</IfModule>
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
./mods-available/deflate.load 0100644 0000000 0000000 00000000124 12261546711 015041 0 ustar root root # Depends: filter
LoadModule deflate_module /usr/lib/apache2/modules/mod_deflate.so
./mods-available/dialup.load 0100644 0000000 0000000 00000000100 12261546711 014705 0 ustar root root LoadModule dialup_module /usr/lib/apache2/modules/mod_dialup.so
./mods-available/dir.conf 0100644 0000000 0000000 00000000235 12261546711 014224 0 ustar root root <IfModule mod_dir.c>
DirectoryIndex index.html index.cgi index.pl index.php index.xhtml index.htm
</IfModule>
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
./mods-available/dir.load 0100644 0000000 0000000 00000000072 12261546711 014215 0 ustar root root LoadModule dir_module /usr/lib/apache2/modules/mod_dir.so
./mods-available/dump_io.load 0100644 0000000 0000000 00000000100 12261546711 015063 0 ustar root root LoadModule dumpio_module /usr/lib/apache2/modules/mod_dumpio.so
./mods-available/echo.load 0100644 0000000 0000000 00000000074 12261546711 014357 0 ustar root root LoadModule echo_module /usr/lib/apache2/modules/mod_echo.so
./mods-available/env.load 0100644 0000000 0000000 00000000072 12261546711 014227 0 ustar root root LoadModule env_module /usr/lib/apache2/modules/mod_env.so
./mods-available/expires.load 0100644 0000000 0000000 00000000102 12261546711 015110 0 ustar root root LoadModule expires_module /usr/lib/apache2/modules/mod_expires.so
./mods-available/ext_filter.load 0100644 0000000 0000000 00000000110 12261546711 015575 0 ustar root root LoadModule ext_filter_module /usr/lib/apache2/modules/mod_ext_filter.so
./mods-available/file_cache.load 0100644 0000000 0000000 00000000131 12261546711 015475 0 ustar root root # Depends: cache
LoadModule file_cache_module /usr/lib/apache2/modules/mod_file_cache.so
./mods-available/filter.load 0100644 0000000 0000000 00000000100 12261546711 014714 0 ustar root root LoadModule filter_module /usr/lib/apache2/modules/mod_filter.so
./mods-available/headers.load 0100644 0000000 0000000 00000000102 12261546711 015044 0 ustar root root LoadModule headers_module /usr/lib/apache2/modules/mod_headers.so
./mods-available/heartbeat.load 0100644 0000000 0000000 00000000260 12261546711 015375 0 ustar root root # This module depends on mod_watchdog to be loaded before. In Debian, this
# module is statically linked.
LoadModule heartbeat_module /usr/lib/apache2/modules/mod_heartbeat.so
./mods-available/heartmonitor.load 0100644 0000000 0000000 00000000266 12261546711 016157 0 ustar root root # This module depends on mod_watchdog to be loaded before. In Debian, this
# module is statically linked.
LoadModule heartmonitor_module /usr/lib/apache2/modules/mod_heartmonitor.so
./mods-available/include.load 0100644 0000000 0000000 00000000122 12261546711 015056 0 ustar root root # Depends: mime
LoadModule include_module /usr/lib/apache2/modules/mod_include.so
./mods-available/info.conf 0100644 0000000 0000000 00000000622 12261546711 014401 0 ustar root root <IfModule mod_info.c>
# Allow remote server configuration reports, with the URL of
# http://servername/server-info (requires that mod_info.c be loaded).
# Uncomment and change the "192.0.2.0/24" to allow access from other hosts.
#
<Location /server-info>
SetHandler server-info
Require local
#Require ip 192.0.2.0/24
</Location>
</IfModule>
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
./mods-available/info.load 0100644 0000000 0000000 00000000074 12261546711 014374 0 ustar root root LoadModule info_module /usr/lib/apache2/modules/mod_info.so
./mods-available/lbmethod_bybusyness.load 0100644 0000000 0000000 00000000164 12262773114 017525 0 ustar root root # Depends: proxy_balancer
LoadModule lbmethod_bybusyness_module /usr/lib/apache2/modules/mod_lbmethod_bybusyness.so
./mods-available/lbmethod_byrequests.load 0100644 0000000 0000000 00000000164 12262773114 017525 0 ustar root root # Depends: proxy_balancer
LoadModule lbmethod_byrequests_module /usr/lib/apache2/modules/mod_lbmethod_byrequests.so
./mods-available/lbmethod_bytraffic.load 0100644 0000000 0000000 00000000162 12262773114 017266 0 ustar root root # Depends: proxy_balancer
LoadModule lbmethod_bytraffic_module /usr/lib/apache2/modules/mod_lbmethod_bytraffic.so
./mods-available/lbmethod_heartbeat.load 0100644 0000000 0000000 00000000162 12262773114 017254 0 ustar root root # Depends: proxy_balancer
LoadModule lbmethod_heartbeat_module /usr/lib/apache2/modules/mod_lbmethod_heartbeat.so
./mods-available/ldap.conf 0100644 0000000 0000000 00000000171 12261546711 014365 0 ustar root root <Location /ldap-status>
SetHandler ldap-status
Require local
</Location>
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
./mods-available/ldap.load 0100644 0000000 0000000 00000000074 12261546711 014361 0 ustar root root LoadModule ldap_module /usr/lib/apache2/modules/mod_ldap.so
./mods-available/log_debug.load 0100644 0000000 0000000 00000000106 12261546711 015364 0 ustar root root LoadModule log_debug_module /usr/lib/apache2/modules/mod_log_debug.so
./mods-available/log_forensic.load 0100644 0000000 0000000 00000000114 12261546711 016105 0 ustar root root LoadModule log_forensic_module /usr/lib/apache2/modules/mod_log_forensic.so
./mods-available/lua.load 0100644 0000000 0000000 00000000072 12261546711 014220 0 ustar root root LoadModule lua_module /usr/lib/apache2/modules/mod_lua.so
./mods-available/macro.load 0100644 0000000 0000000 00000000076 12261546711 014544 0 ustar root root LoadModule macro_module /usr/lib/apache2/modules/mod_macro.so
./mods-available/mime.conf 0100644 0000000 0000000 00000016727 12261546711 014412 0 ustar root root <IfModule mod_mime.c>
#
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
#
TypesConfig /etc/mime.types
#
# AddType allows you to add to or override the MIME configuration
# file mime.types for specific file types.
#
#AddType application/x-gzip .tgz
#
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
# Despite the name similarity, the following Add* directives have
# nothing to do with the FancyIndexing customization directives above.
#
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
#AddEncoding x-bzip2 .bz2
#
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
#
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
AddType application/x-bzip2 .bz2
#
# DefaultLanguage and AddLanguage allows you to specify the language of
# a document. You can then use content negotiation to give a browser a
# file in a language the user can understand.
#
# Specify a default language. This means that all data
# going out without a specific language tag (see below) will
# be marked with this one. You probably do NOT want to set
# this unless you are sure it is correct for all cases.
#
# * It is generally better to not mark a page as
# * being a certain language than marking it with the wrong
# * language!
#
# DefaultLanguage nl
#
# Note 1: The suffix does not have to be the same as the language
# keyword --- those with documents in Polish (whose net-standard
# language code is pl) may wish to use "AddLanguage pl .po" to
# avoid the ambiguity with the common suffix for perl scripts.
#
# Note 2: The example entries below illustrate that in some cases
# the two character 'Language' abbreviation is not identical to
# the two character 'Country' code for its country,
# E.g. 'Danmark/dk' versus 'Danish/da'.
#
# Note 3: In the case of 'ltz' we violate the RFC by using a three char
# specifier. There is 'work in progress' to fix this and get
# the reference data for rfc1766 cleaned up.
#
# Catalan (ca) - Croatian (hr) - Czech (cs) - Danish (da) - Dutch (nl)
# English (en) - Esperanto (eo) - Estonian (et) - French (fr) - German (de)
# Greek-Modern (el) - Hebrew (he) - Italian (it) - Japanese (ja)
# Korean (ko) - Luxembourgeois* (ltz) - Norwegian Nynorsk (nn)
# Norwegian (no) - Polish (pl) - Portugese (pt)
# Brazilian Portuguese (pt-BR) - Russian (ru) - Swedish (sv)
# Simplified Chinese (zh-CN) - Spanish (es) - Traditional Chinese (zh-TW)
#
AddLanguage am .amh
AddLanguage ar .ara
AddLanguage be .be
AddLanguage bg .bg
AddLanguage bn .bn
AddLanguage br .br
AddLanguage bs .bs
AddLanguage ca .ca
AddLanguage cs .cz .cs
AddLanguage cy .cy
AddLanguage da .dk
AddLanguage de .de
AddLanguage dz .dz
AddLanguage el .el
AddLanguage en .en
AddLanguage eo .eo
# es is ecmascript in /etc/mime.types
RemoveType es
AddLanguage es .es
AddLanguage et .et
AddLanguage eu .eu
AddLanguage fa .fa
AddLanguage fi .fi
AddLanguage fr .fr
AddLanguage ga .ga
AddLanguage gl .glg
AddLanguage gu .gu
AddLanguage he .he
AddLanguage hi .hi
AddLanguage hr .hr
AddLanguage hu .hu
AddLanguage hy .hy
AddLanguage id .id
AddLanguage is .is
AddLanguage it .it
AddLanguage ja .ja
AddLanguage ka .ka
AddLanguage kk .kk
AddLanguage km .km
AddLanguage kn .kn
AddLanguage ko .ko
AddLanguage ku .ku
AddLanguage lo .lo
AddLanguage lt .lt
AddLanguage ltz .ltz
AddLanguage lv .lv
AddLanguage mg .mg
AddLanguage mk .mk
AddLanguage ml .ml
AddLanguage mr .mr
AddLanguage ms .msa
AddLanguage nb .nob
AddLanguage ne .ne
AddLanguage nl .nl
AddLanguage nn .nn
AddLanguage no .no
AddLanguage pa .pa
AddLanguage pl .po
AddLanguage pt-BR .pt-br
AddLanguage pt .pt
AddLanguage ro .ro
AddLanguage ru .ru
AddLanguage sa .sa
AddLanguage se .se
AddLanguage si .si
AddLanguage sk .sk
AddLanguage sl .sl
AddLanguage sq .sq
AddLanguage sr .sr
AddLanguage sv .sv
AddLanguage ta .ta
AddLanguage te .te
AddLanguage th .th
AddLanguage tl .tl
RemoveType tr
# tr is troff in /etc/mime.types
AddLanguage tr .tr
AddLanguage uk .uk
AddLanguage ur .ur
AddLanguage vi .vi
AddLanguage wo .wo
AddLanguage xh .xh
AddLanguage zh-CN .zh-cn
AddLanguage zh-TW .zh-tw
#
# Commonly used filename extensions to character sets. You probably
# want to avoid clashes with the language extensions, unless you
# are good at carefully testing your setup after each change.
# See http://www.iana.org/assignments/character-sets for the
# official list of charset names and their respective RFCs.
#
AddCharset us-ascii .ascii .us-ascii
AddCharset ISO-8859-1 .iso8859-1 .latin1
AddCharset ISO-8859-2 .iso8859-2 .latin2 .cen
AddCharset ISO-8859-3 .iso8859-3 .latin3
AddCharset ISO-8859-4 .iso8859-4 .latin4
AddCharset ISO-8859-5 .iso8859-5 .cyr .iso-ru
AddCharset ISO-8859-6 .iso8859-6 .arb .arabic
AddCharset ISO-8859-7 .iso8859-7 .grk .greek
AddCharset ISO-8859-8 .iso8859-8 .heb .hebrew
AddCharset ISO-8859-9 .iso8859-9 .latin5 .trk
AddCharset ISO-8859-10 .iso8859-10 .latin6
AddCharset ISO-8859-13 .iso8859-13
AddCharset ISO-8859-14 .iso8859-14 .latin8
AddCharset ISO-8859-15 .iso8859-15 .latin9
AddCharset ISO-8859-16 .iso8859-16 .latin10
AddCharset ISO-2022-JP .iso2022-jp .jis
AddCharset ISO-2022-KR .iso2022-kr .kis
AddCharset ISO-2022-CN .iso2022-cn .cis
AddCharset Big5 .Big5 .big5 .b5
AddCharset cn-Big5 .cn-big5
# For russian, more than one charset is used (depends on client, mostly):
AddCharset WINDOWS-1251 .cp-1251 .win-1251
AddCharset CP866 .cp866
AddCharset KOI8 .koi8
AddCharset KOI8-E .koi8-e
AddCharset KOI8-r .koi8-r .koi8-ru
AddCharset KOI8-U .koi8-u
AddCharset KOI8-ru .koi8-uk .ua
AddCharset ISO-10646-UCS-2 .ucs2
AddCharset ISO-10646-UCS-4 .ucs4
AddCharset UTF-7 .utf7
AddCharset UTF-8 .utf8
AddCharset UTF-16 .utf16
AddCharset UTF-16BE .utf16be
AddCharset UTF-16LE .utf16le
AddCharset UTF-32 .utf32
AddCharset UTF-32BE .utf32be
AddCharset UTF-32LE .utf32le
AddCharset euc-cn .euc-cn
AddCharset euc-gb .euc-gb
AddCharset euc-jp .euc-jp
AddCharset euc-kr .euc-kr
#Not sure how euc-tw got in - IANA doesn't list it???
AddCharset EUC-TW .euc-tw
AddCharset gb2312 .gb2312 .gb
AddCharset iso-10646-ucs-2 .ucs-2 .iso-10646-ucs-2
AddCharset iso-10646-ucs-4 .ucs-4 .iso-10646-ucs-4
AddCharset shift_jis .shift_jis .sjis
AddCharset BRF .brf
#
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
#
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#
#AddHandler cgi-script .cgi
#
# For files that include their own HTTP headers:
#
#AddHandler send-as-is asis
#
# For server-parsed imagemap files:
#
#AddHandler imap-file map
#
# For type maps (negotiated resources):
# (This is enabled by default to allow the Apache "It Worked" page
# to be distributed in multiple languages.)
#
AddHandler type-map var
#
# Filters allow you to process content before it is sent to the client.
#
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#
AddType text/html .shtml
AddOutputFilter INCLUDES .shtml
</IfModule>
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
./mods-available/mime.load 0100644 0000000 0000000 00000000074 12261546711 014370 0 ustar root root LoadModule mime_module /usr/lib/apache2/modules/mod_mime.so
./mods-available/mime_magic.conf 0100644 0000000 0000000 00000000170 12261546711 015533 0 ustar root root <IfModule mod_mime_magic.c>
MIMEMagicFile /etc/apache2/magic
</IfModule>
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
./mods-available/mime_magic.load 0100644 0000000 0000000 00000000110 12261546711 015517 0 ustar root root LoadModule mime_magic_module /usr/lib/apache2/modules/mod_mime_magic.so
./mods-available/mpm_event.conf 0100644 0000000 0000000 00000001234 12261546711 015440 0 ustar root root # event MPM
# StartServers: initial number of server processes to start
# MinSpareThreads: minimum number of worker threads which are kept spare
# MaxSpareThreads: maximum number of worker threads which are kept spare
# ThreadsPerChild: constant number of worker threads in each server process
# MaxRequestWorkers: maximum number of worker threads
# MaxConnectionsPerChild: maximum number of requests a server process serves
<IfModule mpm_event_module>
StartServers 2
MinSpareThreads 25
MaxSpareThreads 75
ThreadLimit 64
ThreadsPerChild 25
MaxRequestWorkers 150
MaxConnectionsPerChild 0
</IfModule>
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
./mods-available/mpm_event.load 0100644 0000000 0000000 00000000152 12705710110 015415 0 ustar root root # Conflicts: mpm_worker mpm_prefork
LoadModule mpm_event_module /usr/lib/apache2/modules/mod_mpm_event.so
./mods-available/mpm_prefork.conf 0100644 0000000 0000000 00000001073 12261546711 015770 0 ustar root root # prefork MPM
# StartServers: number of server processes to start
# MinSpareServers: minimum number of server processes which are kept spare
# MaxSpareServers: maximum number of server processes which are kept spare
# MaxRequestWorkers: maximum number of server processes allowed to start
# MaxConnectionsPerChild: maximum number of requests a server process serves
<IfModule mpm_prefork_module>
StartServers 5
MinSpareServers 5
MaxSpareServers 10
MaxRequestWorkers 150
MaxConnectionsPerChild 0
</IfModule>
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
./mods-available/mpm_prefork.load 0100644 0000000 0000000 00000000154 12705710110 015746 0 ustar root root # Conflicts: mpm_event mpm_worker
LoadModule mpm_prefork_module /usr/lib/apache2/modules/mod_mpm_prefork.so
./mods-available/mpm_worker.conf 0100644 0000000 0000000 00000001504 12261546711 015630 0 ustar root root # worker MPM
# StartServers: initial number of server processes to start
# MinSpareThreads: minimum number of worker threads which are kept spare
# MaxSpareThreads: maximum number of worker threads which are kept spare
# ThreadLimit: ThreadsPerChild can be changed to this maximum value during a
# graceful restart. ThreadLimit can only be changed by stopping
# and starting Apache.
# ThreadsPerChild: constant number of worker threads in each server process
# MaxRequestWorkers: maximum number of threads
# MaxConnectionsPerChild: maximum number of requests a server process serves
<IfModule mpm_worker_module>
StartServers 2
MinSpareThreads 25
MaxSpareThreads 75
ThreadLimit 64
ThreadsPerChild 25
MaxRequestWorkers 150
MaxConnectionsPerChild 0
</IfModule>
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
./mods-available/mpm_worker.load 0100644 0000000 0000000 00000000153 12705710110 015606 0 ustar root root # Conflicts: mpm_event mpm_prefork
LoadModule mpm_worker_module /usr/lib/apache2/modules/mod_mpm_worker.so
./mods-available/negotiation.conf 0100644 0000000 0000000 00000001324 12261546711 015766 0 ustar root root <IfModule mod_negotiation.c>
# LanguagePriority allows you to give precedence to some languages
# in case of a tie during content negotiation.
#
# Just list the languages in decreasing order of preference. We have
# more or less alphabetized them here. You probably want to change this.
#
LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv tr zh-CN zh-TW
#
# ForceLanguagePriority allows you to serve a result page rather than
# MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback)
# [in case no accepted languages matched the available variants]
#
ForceLanguagePriority Prefer Fallback
</IfModule>
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
./mods-available/negotiation.load 0100644 0000000 0000000 00000000112 12261546711 015752 0 ustar root root LoadModule negotiation_module /usr/lib/apache2/modules/mod_negotiation.so
./mods-available/php5.conf 0100644 0000000 0000000 00000001601 12545257446 014331 0 ustar root root <FilesMatch ".+\.ph(p[345]?|t|tml)$">
SetHandler application/x-httpd-php
</FilesMatch>
<FilesMatch ".+\.phps$">
SetHandler application/x-httpd-php-source
# Deny access to raw php sources by default
# To re-enable it's recommended to enable access to the files
# only in specific virtual host or directory
Order Deny,Allow
Deny from all
</FilesMatch>
# Deny access to files without filename (e.g. '.php')
<FilesMatch "^\.ph(p[345]?|t|tml|ps)$">
Order Deny,Allow
Deny from all
</FilesMatch>
# Running PHP scripts in user directories is disabled by default
#
# To re-enable PHP in user directories comment the following lines
# (from <IfModule ...> to </IfModule>.) Do NOT set it to On as it
# prevents .htaccess files from disabling it.
<IfModule mod_userdir.c>
<Directory /home/*/public_html>
php_admin_flag engine Off
</Directory>
</IfModule>
./mods-available/php5.load 0100644 0000000 0000000 00000000073 12545257446 014325 0 ustar root root LoadModule php5_module /usr/lib/apache2/modules/libphp5.so
./mods-available/proxy.conf 0100644 0000000 0000000 00000001466 12261546711 014636 0 ustar root root <IfModule mod_proxy.c>
# If you want to use apache2 as a forward proxy, uncomment the
# 'ProxyRequests On' line and the <Proxy *> block below.
# WARNING: Be careful to restrict access inside the <Proxy *> block.
# Open proxy servers are dangerous both to your network and to the
# Internet at large.
#
# If you only want to use apache2 as a reverse proxy/gateway in
# front of some web application server, you DON'T need
# 'ProxyRequests On'.
#ProxyRequests On
#<Proxy *>
# AddDefaultCharset off
# Require all denied
# #Require local
#</Proxy>
# Enable/disable the handling of HTTP/1.1 "Via:" headers.
# ("Full" adds the server version; "Block" removes all outgoing Via: headers)
# Set to one of: Off | On | Full | Block
#ProxyVia Off
</IfModule>
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
./mods-available/proxy.load 0100644 0000000 0000000 00000000076 12261546711 014624 0 ustar root root LoadModule proxy_module /usr/lib/apache2/modules/mod_proxy.so
./mods-available/proxy_ajp.load 0100644 0000000 0000000 00000000127 12261546711 015453 0 ustar root root # Depends: proxy
LoadModule proxy_ajp_module /usr/lib/apache2/modules/mod_proxy_ajp.so
./mods-available/proxy_balancer.conf 0100644 0000000 0000000 00000000533 12261546711 016457 0 ustar root root <IfModule mod_proxy_balancer.c>
# Balancer manager enables dynamic update of balancer members
# (needs mod_status). Uncomment to enable.
#
#<IfModule mod_status.c>
# <Location /balancer-manager>
# SetHandler balancer-manager
# Require local
# </Location>
#</IfModule>
</IfModule>
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
./mods-available/proxy_balancer.load 0100644 0000000 0000000 00000000163 12261546711 016450 0 ustar root root # Depends: proxy alias slotmem_shm
LoadModule proxy_balancer_module /usr/lib/apache2/modules/mod_proxy_balancer.so
./mods-available/proxy_connect.load 0100644 0000000 0000000 00000000137 12261546711 016333 0 ustar root root # Depends: proxy
LoadModule proxy_connect_module /usr/lib/apache2/modules/mod_proxy_connect.so
./mods-available/proxy_express.load 0100644 0000000 0000000 00000000137 12261546711 016373 0 ustar root root # Depends: proxy
LoadModule proxy_express_module /usr/lib/apache2/modules/mod_proxy_express.so
./mods-available/proxy_fcgi.load 0100644 0000000 0000000 00000000131 12261546711 015604 0 ustar root root # Depends: proxy
LoadModule proxy_fcgi_module /usr/lib/apache2/modules/mod_proxy_fcgi.so
./mods-available/proxy_fdpass.load 0100644 0000000 0000000 00000000135 12261546711 016160 0 ustar root root # Depends: proxy
LoadModule proxy_fdpass_module /usr/lib/apache2/modules/mod_proxy_fdpass.so
./mods-available/proxy_ftp.conf 0100644 0000000 0000000 00000000275 12261546711 015504 0 ustar root root <IfModule mod_proxy_ftp.c>
# Define the character set for proxied FTP listings. Default is ISO-8859-1
ProxyFtpDirCharset UTF-8
</IfModule>
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
./mods-available/proxy_ftp.load 0100644 0000000 0000000 00000000127 12261546711 015472 0 ustar root root # Depends: proxy
LoadModule proxy_ftp_module /usr/lib/apache2/modules/mod_proxy_ftp.so
./mods-available/proxy_html.load 0100644 0000000 0000000 00000000131 12261546711 015640 0 ustar root root # Depends: proxy
LoadModule proxy_html_module /usr/lib/apache2/modules/mod_proxy_html.so
./mods-available/proxy_http.load 0100644 0000000 0000000 00000000131 12261546711 015653 0 ustar root root # Depends: proxy
LoadModule proxy_http_module /usr/lib/apache2/modules/mod_proxy_http.so
./mods-available/proxy_scgi.load 0100644 0000000 0000000 00000000131 12261546711 015621 0 ustar root root # Depends: proxy
LoadModule proxy_scgi_module /usr/lib/apache2/modules/mod_proxy_scgi.so
./mods-available/proxy_wstunnel.load 0100644 0000000 0000000 00000000141 12261546711 016554 0 ustar root root # Depends: proxy
LoadModule proxy_wstunnel_module /usr/lib/apache2/modules/mod_proxy_wstunnel.so
./mods-available/ratelimit.load 0100644 0000000 0000000 00000000125 12261546711 015430 0 ustar root root # Depends: env
LoadModule ratelimit_module /usr/lib/apache2/modules/mod_ratelimit.so
./mods-available/reflector.load 0100644 0000000 0000000 00000000106 12261546711 015422 0 ustar root root LoadModule reflector_module /usr/lib/apache2/modules/mod_reflector.so
./mods-available/remoteip.load 0100644 0000000 0000000 00000000104 12261546711 015257 0 ustar root root LoadModule remoteip_module /usr/lib/apache2/modules/mod_remoteip.so
./mods-available/reqtimeout.conf 0100644 0000000 0000000 00000002246 12261546711 015650 0 ustar root root <IfModule reqtimeout_module>
# mod_reqtimeout limits the time waiting on the client to prevent an
# attacker from causing a denial of service by opening many connections
# but not sending requests. This file tries to give a sensible default
# configuration, but it may be necessary to tune the timeout values to
# the actual situation. Note that it is also possible to configure
# mod_reqtimeout per virtual host.
# Wait max 20 seconds for the first byte of the request line+headers
# From then, require a minimum data rate of 500 bytes/s, but don't
# wait longer than 40 seconds in total.
# Note: Lower timeouts may make sense on non-ssl virtual hosts but can
# cause problem with ssl enabled virtual hosts: This timeout includes
# the time a browser may need to fetch the CRL for the certificate. If
# the CRL server is not reachable, it may take more than 10 seconds
# until the browser gives up.
RequestReadTimeout header=20-40,minrate=500
# Wait max 10 seconds for the first byte of the request body (if any)
# From then, require a minimum data rate of 500 bytes/s
RequestReadTimeout body=10,minrate=500
</IfModule>
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
./mods-available/reqtimeout.load 0100644 0000000 0000000 00000000110 12261546711 015626 0 ustar root root LoadModule reqtimeout_module /usr/lib/apache2/modules/mod_reqtimeout.so
./mods-available/request.load 0100644 0000000 0000000 00000000102 12261546711 015121 0 ustar root root LoadModule request_module /usr/lib/apache2/modules/mod_request.so
./mods-available/rewrite.load 0100644 0000000 0000000 00000000102 12261546711 015112 0 ustar root root LoadModule rewrite_module /usr/lib/apache2/modules/mod_rewrite.so
./mods-available/sed.load 0100644 0000000 0000000 00000000072 12261546711 014212 0 ustar root root LoadModule sed_module /usr/lib/apache2/modules/mod_sed.so
./mods-available/session.load 0100644 0000000 0000000 00000000102 12261546711 015114 0 ustar root root LoadModule session_module /usr/lib/apache2/modules/mod_session.so
./mods-available/session_cookie.load 0100644 0000000 0000000 00000000143 12261546711 016452 0 ustar root root # Depends: session
LoadModule session_cookie_module /usr/lib/apache2/modules/mod_session_cookie.so
./mods-available/session_crypto.load 0100644 0000000 0000000 00000000143 12261546711 016521 0 ustar root root # Depends: session
LoadModule session_crypto_module /usr/lib/apache2/modules/mod_session_crypto.so
./mods-available/session_dbd.load 0100644 0000000 0000000 00000000135 12261546711 015733 0 ustar root root # Depends: session
LoadModule session_dbd_module /usr/lib/apache2/modules/mod_session_dbd.so
./mods-available/setenvif.conf 0100644 0000000 0000000 00000002400 12261546711 015265 0 ustar root root <IfModule mod_setenvif.c>
#
# The following directives modify normal HTTP response behavior to
# handle known problems with browser implementations.
#
BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
BrowserMatch "RealPlayer 4\.0" force-response-1.0
BrowserMatch "Java/1\.0" force-response-1.0
BrowserMatch "JDK/1\.0" force-response-1.0
#
# The following directive disables redirects on non-GET requests for
# a directory that does not include the trailing slash. This fixes a
# problem with Microsoft WebFolders which does not appropriately handle
# redirects for folders with DAV methods.
# Same deal with Apple's DAV filesystem and Gnome VFS support for DAV.
#
BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully
BrowserMatch "MS FrontPage" redirect-carefully
BrowserMatch "^WebDrive" redirect-carefully
BrowserMatch "^WebDAVFS/1.[012]" redirect-carefully
BrowserMatch "^gnome-vfs/1.0" redirect-carefully
BrowserMatch "^gvfs/1" redirect-carefully
BrowserMatch "^XML Spy" redirect-carefully
BrowserMatch "^Dreamweaver-WebDAV-SCM1" redirect-carefully
BrowserMatch " Konqueror/4" redirect-carefully
</IfModule>
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
./mods-available/setenvif.load 0100644 0000000 0000000 00000000104 12261546711 015256 0 ustar root root LoadModule setenvif_module /usr/lib/apache2/modules/mod_setenvif.so
./mods-available/slotmem_plain.load 0100644 0000000 0000000 00000000116 12261546711 016301 0 ustar root root LoadModule slotmem_plain_module /usr/lib/apache2/modules/mod_slotmem_plain.so
./mods-available/slotmem_shm.load 0100644 0000000 0000000 00000000112 12261546711 015761 0 ustar root root LoadModule slotmem_shm_module /usr/lib/apache2/modules/mod_slotmem_shm.so
./mods-available/socache_dbm.load 0100644 0000000 0000000 00000000112 12261546711 015661 0 ustar root root LoadModule socache_dbm_module /usr/lib/apache2/modules/mod_socache_dbm.so
./mods-available/socache_memcache.load 0100644 0000000 0000000 00000000124 12261546711 016664 0 ustar root root LoadModule socache_memcache_module /usr/lib/apache2/modules/mod_socache_memcache.so
./mods-available/socache_shmcb.load 0100644 0000000 0000000 00000000116 12261546711 016217 0 ustar root root LoadModule socache_shmcb_module /usr/lib/apache2/modules/mod_socache_shmcb.so
./mods-available/speling.load 0100644 0000000 0000000 00000000102 12261546711 015072 0 ustar root root LoadModule speling_module /usr/lib/apache2/modules/mod_speling.so
./mods-available/ssl.conf 0100644 0000000 0000000 00000006514 12263000007 014236 0 ustar root root <IfModule mod_ssl.c>
# Pseudo Random Number Generator (PRNG):
# Configure one or more sources to seed the PRNG of the SSL library.
# The seed data should be of good random quality.
# WARNING! On some platforms /dev/random blocks if not enough entropy
# is available. This means you then cannot use the /dev/random device
# because it would lead to very long connection times (as long as
# it requires to make more entropy available). But usually those
# platforms additionally provide a /dev/urandom device which doesn't
# block. So, if available, use this one instead. Read the mod_ssl User
# Manual for more details.
#
SSLRandomSeed startup builtin
SSLRandomSeed startup file:/dev/urandom 512
SSLRandomSeed connect builtin
SSLRandomSeed connect file:/dev/urandom 512
##
## SSL Global Context
##
## All SSL configuration in this context applies both to
## the main server and all SSL-enabled virtual hosts.
##
#
# Some MIME-types for downloading Certificates and CRLs
#
AddType application/x-x509-ca-cert .crt
AddType application/x-pkcs7-crl .crl
# Pass Phrase Dialog:
# Configure the pass phrase gathering process.
# The filtering dialog program (`builtin' is a internal
# terminal dialog) has to provide the pass phrase on stdout.
SSLPassPhraseDialog exec:/usr/share/apache2/ask-for-passphrase
# Inter-Process Session Cache:
# Configure the SSL Session Cache: First the mechanism
# to use and second the expiring timeout (in seconds).
# (The mechanism dbm has known memory leaks and should not be used).
#SSLSessionCache dbm:${APACHE_RUN_DIR}/ssl_scache
SSLSessionCache shmcb:${APACHE_RUN_DIR}/ssl_scache(512000)
SSLSessionCacheTimeout 300
# Semaphore:
# Configure the path to the mutual exclusion semaphore the
# SSL engine uses internally for inter-process synchronization.
# (Disabled by default, the global Mutex directive consolidates by default
# this)
#Mutex file:${APACHE_LOCK_DIR}/ssl_mutex ssl-cache
# SSL Cipher Suite:
# List the ciphers that the client is permitted to negotiate. See the
# ciphers(1) man page from the openssl package for list of all available
# options.
# Enable only secure ciphers:
SSLCipherSuite HIGH:MEDIUM:!aNULL:!MD5
# Speed-optimized SSL Cipher configuration:
# If speed is your main concern (on busy HTTPS servers e.g.),
# you might want to force clients to specific, performance
# optimized ciphers. In this case, prepend those ciphers
# to the SSLCipherSuite list, and enable SSLHonorCipherOrder.
# Caveat: by giving precedence to RC4-SHA and AES128-SHA
# (as in the example below), most connections will no longer
# have perfect forward secrecy - if the server's key is
# compromised, captures of past or future traffic must be
# considered compromised, too.
#SSLCipherSuite RC4-SHA:AES128-SHA:HIGH:MEDIUM:!aNULL:!MD5
#SSLHonorCipherOrder on
# The protocols to enable.
# Available values: all, SSLv3, TLSv1, TLSv1.1, TLSv1.2
# SSL v2 is no longer supported
SSLProtocol all
# Allow insecure renegotiation with clients which do not yet support the
# secure renegotiation protocol. Default: Off
#SSLInsecureRenegotiation on
# Whether to forbid non-SNI clients to access name based virtual hosts.
# Default: Off
#SSLStrictSNIVHostCheck On
</IfModule>
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
./mods-available/ssl.load 0100644 0000000 0000000 00000000141 12261546711 014235 0 ustar root root # Depends: setenvif mime socache_shmcb
LoadModule ssl_module /usr/lib/apache2/modules/mod_ssl.so
./mods-available/status.conf 0100644 0000000 0000000 00000001355 12261546711 014775 0 ustar root root <IfModule mod_status.c>
# Allow server status reports generated by mod_status,
# with the URL of http://servername/server-status
# Uncomment and change the "192.0.2.0/24" to allow access from other hosts.
<Location /server-status>
SetHandler server-status
Require local
#Require ip 192.0.2.0/24
</Location>
# Keep track of extended status information for each request
ExtendedStatus On
# Determine if mod_status displays the first 63 characters of a request or
# the last 63, assuming the request itself is greater than 63 chars.
# Default: Off
#SeeRequestTail On
<IfModule mod_proxy.c>
# Show Proxy LoadBalancer status in mod_status
ProxyStatus On
</IfModule>
</IfModule>
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
./mods-available/status.load 0100644 0000000 0000000 00000000100 12261546711 014752 0 ustar root root LoadModule status_module /usr/lib/apache2/modules/mod_status.so
./mods-available/substitute.load 0100644 0000000 0000000 00000000110 12261546711 015643 0 ustar root root LoadModule substitute_module /usr/lib/apache2/modules/mod_substitute.so
./mods-available/suexec.load 0100644 0000000 0000000 00000000100 12261546711 014723 0 ustar root root LoadModule suexec_module /usr/lib/apache2/modules/mod_suexec.so
./mods-available/unique_id.load 0100644 0000000 0000000 00000000106 12261546711 015417 0 ustar root root LoadModule unique_id_module /usr/lib/apache2/modules/mod_unique_id.so
./mods-available/userdir.conf 0100644 0000000 0000000 00000000647 12261546711 015132 0 ustar root root <IfModule mod_userdir.c>
UserDir public_html
UserDir disabled root
<Directory /home/*/public_html>
AllowOverride FileInfo AuthConfig Limit Indexes
Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
<Limit GET POST OPTIONS>
Require all granted
</Limit>
<LimitExcept GET POST OPTIONS>
Require all denied
</LimitExcept>
</Directory>
</IfModule>
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
./mods-available/userdir.load 0100644 0000000 0000000 00000000102 12261546711 015106 0 ustar root root LoadModule userdir_module /usr/lib/apache2/modules/mod_userdir.so
./mods-available/usertrack.load 0100644 0000000 0000000 00000000106 12261546711 015440 0 ustar root root LoadModule usertrack_module /usr/lib/apache2/modules/mod_usertrack.so
./mods-available/vhost_alias.load 0100644 0000000 0000000 00000000112 12261546711 015746 0 ustar root root LoadModule vhost_alias_module /usr/lib/apache2/modules/mod_vhost_alias.so
./mods-available/xml2enc.load 0100644 0000000 0000000 00000000102 12261546711 015001 0 ustar root root LoadModule xml2enc_module /usr/lib/apache2/modules/mod_xml2enc.so
./sites-available/000-default.conf 0100644 0000000 0000000 00000002464 12262777736 015600 0 ustar root root <VirtualHost *:80>
# The ServerName directive sets the request scheme, hostname and port that
# the server uses to identify itself. This is used when creating
# redirection URLs. In the context of virtual hosts, the ServerName
# specifies what hostname must appear in the request's Host: header to
# match this virtual host. For the default virtual host (this file) this
# value is not decisive as it is used as a last resort host regardless.
# However, you must set it for any further virtual host explicitly.
#ServerName www.example.com
ServerAdmin webmaster@localhost
DocumentRoot /var/www/html
# Available loglevels: trace8, ..., trace1, debug, info, notice, warn,
# error, crit, alert, emerg.
# It is also possible to configure the loglevel for particular
# modules, e.g.
#LogLevel info ssl:warn
ErrorLog ${APACHE_LOG_DIR}/error.log
CustomLog ${APACHE_LOG_DIR}/access.log combined
# For most configuration files from conf-available/, which are
# enabled or disabled at a global level, it is possible to
# include a line for only one particular virtual host. For example the
# following line enables the CGI configuration for this host only
# after it has been globally disabled with "a2disconf".
#Include conf-available/serve-cgi-bin.conf
</VirtualHost>
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
./sites-available/default-ssl.conf 0100644 0000000 0000000 00000014445 12262777736 016104 0 ustar root root <IfModule mod_ssl.c>
<VirtualHost _default_:443>
ServerAdmin webmaster@localhost
DocumentRoot /var/www/html
# Available loglevels: trace8, ..., trace1, debug, info, notice, warn,
# error, crit, alert, emerg.
# It is also possible to configure the loglevel for particular
# modules, e.g.
#LogLevel info ssl:warn
ErrorLog ${APACHE_LOG_DIR}/error.log
CustomLog ${APACHE_LOG_DIR}/access.log combined
# For most configuration files from conf-available/, which are
# enabled or disabled at a global level, it is possible to
# include a line for only one particular virtual host. For example the
# following line enables the CGI configuration for this host only
# after it has been globally disabled with "a2disconf".
#Include conf-available/serve-cgi-bin.conf
# SSL Engine Switch:
# Enable/Disable SSL for this virtual host.
SSLEngine on
# A self-signed (snakeoil) certificate can be created by installing
# the ssl-cert package. See
# /usr/share/doc/apache2/README.Debian.gz for more info.
# If both key and certificate are stored in the same file, only the
# SSLCertificateFile directive is needed.
SSLCertificateFile /etc/ssl/certs/ssl-cert-snakeoil.pem
SSLCertificateKeyFile /etc/ssl/private/ssl-cert-snakeoil.key
# Server Certificate Chain:
# Point SSLCertificateChainFile at a file containing the
# concatenation of PEM encoded CA certificates which form the
# certificate chain for the server certificate. Alternatively
# the referenced file can be the same as SSLCertificateFile
# when the CA certificates are directly appended to the server
# certificate for convinience.
#SSLCertificateChainFile /etc/apache2/ssl.crt/server-ca.crt
# Certificate Authority (CA):
# Set the CA certificate verification path where to find CA
# certificates for client authentication or alternatively one
# huge file containing all of them (file must be PEM encoded)
# Note: Inside SSLCACertificatePath you need hash symlinks
# to point to the certificate files. Use the provided
# Makefile to update the hash symlinks after changes.
#SSLCACertificatePath /etc/ssl/certs/
#SSLCACertificateFile /etc/apache2/ssl.crt/ca-bundle.crt
# Certificate Revocation Lists (CRL):
# Set the CA revocation path where to find CA CRLs for client
# authentication or alternatively one huge file containing all
# of them (file must be PEM encoded)
# Note: Inside SSLCARevocationPath you need hash symlinks
# to point to the certificate files. Use the provided
# Makefile to update the hash symlinks after changes.
#SSLCARevocationPath /etc/apache2/ssl.crl/
#SSLCARevocationFile /etc/apache2/ssl.crl/ca-bundle.crl
# Client Authentication (Type):
# Client certificate verification type and depth. Types are
# none, optional, require and optional_no_ca. Depth is a
# number which specifies how deeply to verify the certificate
# issuer chain before deciding the certificate is not valid.
#SSLVerifyClient require
#SSLVerifyDepth 10
# SSL Engine Options:
# Set various options for the SSL engine.
# o FakeBasicAuth:
# Translate the client X.509 into a Basic Authorisation. This means that
# the standard Auth/DBMAuth methods can be used for access control. The
# user name is the `one line' version of the client's X.509 certificate.
# Note that no password is obtained from the user. Every entry in the user
# file needs this password: `xxj31ZMTZzkVA'.
# o ExportCertData:
# This exports two additional environment variables: SSL_CLIENT_CERT and
# SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
# server (always existing) and the client (only existing when client
# authentication is used). This can be used to import the certificates
# into CGI scripts.
# o StdEnvVars:
# This exports the standard SSL/TLS related `SSL_*' environment variables.
# Per default this exportation is switched off for performance reasons,
# because the extraction step is an expensive operation and is usually
# useless for serving static content. So one usually enables the
# exportation for CGI and SSI requests only.
# o OptRenegotiate:
# This enables optimized SSL connection renegotiation handling when SSL
# directives are used in per-directory context.
#SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire
<FilesMatch "\.(cgi|shtml|phtml|php)$">
SSLOptions +StdEnvVars
</FilesMatch>
<Directory /usr/lib/cgi-bin>
SSLOptions +StdEnvVars
</Directory>
# SSL Protocol Adjustments:
# The safe and default but still SSL/TLS standard compliant shutdown
# approach is that mod_ssl sends the close notify alert but doesn't wait for
# the close notify alert from client. When you need a different shutdown
# approach you can use one of the following variables:
# o ssl-unclean-shutdown:
# This forces an unclean shutdown when the connection is closed, i.e. no
# SSL close notify alert is send or allowed to received. This violates
# the SSL/TLS standard but is needed for some brain-dead browsers. Use
# this when you receive I/O errors because of the standard approach where
# mod_ssl sends the close notify alert.
# o ssl-accurate-shutdown:
# This forces an accurate shutdown when the connection is closed, i.e. a
# SSL close notify alert is send and mod_ssl waits for the close notify
# alert of the client. This is 100% SSL/TLS standard compliant, but in
# practice often causes hanging connections with brain-dead browsers. Use
# this only for browsers where you know that their SSL implementation
# works correctly.
# Notice: Most problems of broken clients are also related to the HTTP
# keep-alive facility, so you usually additionally want to disable
# keep-alive for those clients, too. Use variable "nokeepalive" for this.
# Similarly, one has to force some clients to use HTTP/1.0 to workaround
# their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
# "force-response-1.0" for this.
BrowserMatch "MSIE [2-6]" \
nokeepalive ssl-unclean-shutdown \
downgrade-1.0 force-response-1.0
# MSIE 7 and newer should be able to use keepalive
BrowserMatch "MSIE [17-9]" ssl-unclean-shutdown
</VirtualHost>
</IfModule>
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
./sites-available/informatica.conf 0100644 0000000 0000000 00000007576 14046241702 016141 0 ustar root root <IfModule mod_ssl.c>
<VirtualHost _default_:443>
ServerAdmin webmaster@localhost
ServerName informatica.uniparthenope.it
ServerAlias www.informatica.uniparthenope.it
DocumentRoot /var/www/html/informatica/
ErrorLog ${APACHE_LOG_DIR}/error.log
CustomLog ${APACHE_LOG_DIR}/access.log combined
# SSL Engine Switch:
# Enable/Disable SSL for this virtual host.
SSLEngine on
# A self-signed (snakeoil) certificate can be created by installing
# the ssl-cert package. See
# /usr/share/doc/apache2/README.Debian.gz for more info.
# If both key and certificate are stored in the same file, only the
# SSLCertificateFile directive is needed.
#SSLCertificateFile /etc/ssl/certs/informatica_uniparthenope_it.crt
SSLCertificateFile /etc/ssl/certs/informatica_uniparthenope_it_cert.cer
SSLCACertificateFile /etc/ssl/certs/informatica_uniparthenope_it_interm.cer
SSLCertificateKeyFile /etc/ssl/private/informatica.uniparthenope.it.key
# This enables optimized SSL connection renegotiation handling when SSL
# directives are used in per-directory context.
#SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire
<FilesMatch "\.(cgi|shtml|phtml|php)$">
SSLOptions +StdEnvVars
</FilesMatch>
<Directory /usr/lib/cgi-bin>
SSLOptions +StdEnvVars
</Directory>
# The safe and default but still SSL/TLS standard compliant shutdown
# their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
# "force-response-1.0" for this.
BrowserMatch "MSIE [2-6]" \
nokeepalive ssl-unclean-shutdown \
downgrade-1.0 force-response-1.0
# MSIE 7 and newer should be able to use keepalive
BrowserMatch "MSIE [17-9]" ssl-unclean-shutdown
</VirtualHost>
<VirtualHost _default_:443>
ServerAdmin webmaster@localhost
ServerName scienzenauticheaeronautiche.uniparthenope.it
ServerAlias www.scienzenauticheaeronautiche.uniparthenope.it
DocumentRoot /var/www/html/nautiche/
ErrorLog ${APACHE_LOG_DIR}/error.log
CustomLog ${APACHE_LOG_DIR}/access.log combined
# SSL Engine Switch:
# Enable/Disable SSL for this virtual host.
SSLEngine on
# A self-signed (snakeoil) certificate can be created by installing
# the ssl-cert package. See
# /usr/share/doc/apache2/README.Debian.gz for more info.
# If both key and certificate are stored in the same file, only the
# SSLCertificateFile directive is needed.
SSLCertificateFile /etc/ssl/certs/informatica_uniparthenope_it.crt
SSLCertificateKeyFile /etc/ssl/certs/informatica_uniparthenope_it.key
# This enables optimized SSL connection renegotiation handling when SSL
# directives are used in per-directory context.
#SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire
<FilesMatch "\.(cgi|shtml|phtml|php)$">
SSLOptions +StdEnvVars
</FilesMatch>
<Directory /usr/lib/cgi-bin>
SSLOptions +StdEnvVars
</Directory>
# The safe and default but still SSL/TLS standard compliant shutdown
# their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
# "force-response-1.0" for this.
BrowserMatch "MSIE [2-6]" \
nokeepalive ssl-unclean-shutdown \
downgrade-1.0 force-response-1.0
# MSIE 7 and newer should be able to use keepalive
BrowserMatch "MSIE [17-9]" ssl-unclean-shutdown
</VirtualHost>
</IfModule>
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
./sites-available/informatica1.conf 0100644 0000000 0000000 00000006703 12703402711 016206 0 ustar root root <VirtualHost *:80>
ServerName informatica.uniparthenope.it
# DocumentRoot /var/www/html/informatica
#ServerAlias www.informatica.uniparthenope.it
Redirect permanent / https://informatica.uniparthenope.it/
# The ServerName directive sets the request scheme, hostname and port that
# the server uses to identify itself. This is used when creating
# redirection URLs. In the context of virtual hosts, the ServerName
# specifies what hostname must appear in the request's Host: header to
# match this virtual host. For the default virtual host (this file) this
# value is not decisive as it is used as a last resort host regardless.
# However, you must set it for any further virtual host explicitly.
#ServerName www.example.com
#ServerAdmin webmaster@localhost
#DocumentRoot /var/www/html/informatica
# Available loglevels: trace8, ..., trace1, debug, info, notice, warn,
# error, crit, alert, emerg.
# It is also possible to configure the loglevel for particular
# modules, e.g.
#LogLevel info ssl:warn
#ErrorLog ${APACHE_LOG_DIR}/error.log
#CustomLog ${APACHE_LOG_DIR}/access.log combined
# For most configuration files from conf-available/, which are
# enabled or disabled at a global level, it is possible to
# include a line for only one particular virtual host. For example the
# following line enables the CGI configuration for this host only
# after it has been globally disabled with "a2disconf".
#Include conf-available/serve-cgi-bin.conf
</VirtualHost>
<VirtualHost *:80>
ServerName helpdesk.uniparthenope.it
ServerAlias assistenzatecnica.uniparthenope.it
DocumentRoot /var/www/html/supporto/
</VirtualHost>
<VirtualHost *:80>
ServerName scienzenauticheaeronautiche.uniparthenope.it
Redirect permanent / https://scienzenauticheaeronautiche.uniparthenope.it
#DocumentRoot /var/www/html/nautiche
#ServerAlias www.informatica.uniparthenope.it
#Redirect permanent / https://scienzenauticheaeronautiche.uniparthenope.it/
# The ServerName directive sets the request scheme, hostname and port that
# the server uses to identify itself. This is used when creating
# redirection URLs. In the context of virtual hosts, the ServerName
# specifies what hostname must appear in the request's Host: header to
# match this virtual host. For the default virtual host (this file) this
# value is not decisive as it is used as a last resort host regardless.
# However, you must set it for any further virtual host explicitly.
#ServerName www.example.com
#ServerAdmin webmaster@localhost
#DocumentRoot /var/www/html/informatica
# Available loglevels: trace8, ..., trace1, debug, info, notice, warn,
# error, crit, alert, emerg.
# It is also possible to configure the loglevel for particular
# modules, e.g.
#LogLevel info ssl:warn
#ErrorLog ${APACHE_LOG_DIR}/error.log
#CustomLog ${APACHE_LOG_DIR}/access.log combined
# For most configuration files from conf-available/, which are
# enabled or disabled at a global level, it is possible to
# include a line for only one particular virtual host. For example the
# following line enables the CGI configuration for this host only
# after it has been globally disabled with "a2disconf".
#Include conf-available/serve-cgi-bin.conf
</VirtualHost>
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
./sites-available/nautiche1.conf 0100644 0000000 0000000 00000002576 12656377317 015542 0 ustar root root <VirtualHost *:80>
# The ServerName directive sets the request scheme, hostname and port that
# the server uses to identify itself. This is used when creating
# redirection URLs. In the context of virtual hosts, the ServerName
# specifies what hostname must appear in the request's Host: header to
# match this virtual host. For the default virtual host (this file) this
# value is not decisive as it is used as a last resort host regardless.
# However, you must set it for any further virtual host explicitly.
#ServerName www.example.com
#ServerAdmin webmaster@localhost
ServerName scienzenauticheaeronautiche.uniparthenope.it
DocumentRoot /var/www/html/nautiche
# Available loglevels: trace8, ..., trace1, debug, info, notice, warn,
# error, crit, alert, emerg.
# It is also possible to configure the loglevel for particular
# modules, e.g.
#LogLevel info ssl:warn
ErrorLog ${APACHE_LOG_DIR}/error.log
CustomLog ${APACHE_LOG_DIR}/access.log combined
# For most configuration files from conf-available/, which are
# enabled or disabled at a global level, it is possible to
# include a line for only one particular virtual host. For example the
# following line enables the CGI configuration for this host only
# after it has been globally disabled with "a2disconf".
#Include conf-available/serve-cgi-bin.conf
</VirtualHost>
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
./sites-enabled/informatica.conf 0120777 0000000 0000000 00000000000 12656373561 024234 2../sites-available/informatica.conf ustar root root ./sites-enabled/informatica1.conf 0120777 0000000 0000000 00000000000 12656375057 024400 2../sites-available/informatica1.conf ustar root root ./conf-enabled/charset.conf 0120777 0000000 0000000 00000000000 12615650313 022106 2../conf-available/charset.conf ustar root root ./conf-enabled/javascript-common.conf 0120777 0000000 0000000 00000000000 12640210215 026103 2../conf-available/javascript-common.conf ustar root root ./conf-enabled/localized-error-pages.conf 0120777 0000000 0000000 00000000000 12615650313 027410 2../conf-available/localized-error-pages.conf ustar root root ./conf-enabled/other-vhosts-access-log.conf 0120777 0000000 0000000 00000000000 12615650313 030172 2../conf-available/other-vhosts-access-log.conf ustar root root ./conf-enabled/security.conf 0120777 0000000 0000000 00000000000 12615650313 022542 2../conf-available/security.conf ustar root root ./conf-enabled/serve-cgi-bin.conf 0120777 0000000 0000000 00000000000 12615650313 024110 2../conf-available/serve-cgi-bin.conf ustar root root ./conf-available/charset.conf 0100644 0000000 0000000 00000000473 12261546711 015066 0 ustar root root # Read the documentation before enabling AddDefaultCharset.
# In general, it is only a good idea if you know that all your files
# have this encoding. It will override any encoding given in the files
# in meta http-equiv or xml encoding tags.
#AddDefaultCharset UTF-8
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
./conf-available/javascript-common.conf 0100644 0000000 0000000 00000000177 12201644345 017066 0 ustar root root Alias /javascript /usr/share/javascript/
<Directory "/usr/share/javascript/">
Options FollowSymLinks MultiViews
</Directory>
./conf-available/localized-error-pages.conf 0100644 0000000 0000000 00000006230 12261546711 017624 0 ustar root root # Customizable error responses come in three flavors:
# 1) plain text
# 2) local redirects
# 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#
#
# Putting this all together, we can internationalize error responses.
#
# We use Alias to redirect any /error/HTTP_<error>.html.var response to
# our collection of by-error message multi-language collections. We use
# includes to substitute the appropriate text.
#
# You can modify the messages' appearance without changing any of the
# default HTTP_<error>.html.var files by adding the line:
#
#Alias /error/include/ "/your/include/path/"
#
# which allows you to create your own set of files by starting with the
# /usr/share/apache2/error/include/ files and copying them to /your/include/path/,
# even on a per-VirtualHost basis. If you include the Alias in the global server
# context, is has to come _before_ the 'Alias /error/ ...' line.
#
# The default include files will display your Apache version number and your
# ServerAdmin email address regardless of the setting of ServerSignature.
#
# WARNING: The configuration below will NOT work out of the box if you have a
# SetHandler directive in a <Location /> context somewhere. Adding
# the following three lines AFTER the <Location /> context should
# make it work in most cases:
# <Location /error/>
# SetHandler none
# </Location>
#
# The internationalized error documents require mod_alias, mod_include
# and mod_negotiation. To activate them, uncomment the following 37 lines.
#<IfModule mod_negotiation.c>
# <IfModule mod_include.c>
# <IfModule mod_alias.c>
#
# Alias /error/ "/usr/share/apache2/error/"
#
# <Directory "/usr/share/apache2/error">
# Options IncludesNoExec
# AddOutputFilter Includes html
# AddHandler type-map var
# Order allow,deny
# Allow from all
# LanguagePriority en cs de es fr it nl sv pt-br ro
# ForceLanguagePriority Prefer Fallback
# </Directory>
#
# ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var
# ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
# ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
# ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var
# ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var
# ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var
# ErrorDocument 410 /error/HTTP_GONE.html.var
# ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var
# ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var
# ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var
# ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var
# ErrorDocument 415 /error/HTTP_UNSUPPORTED_MEDIA_TYPE.html.var
# ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var
# ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var
# ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var
# ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var
# ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var
# </IfModule>
# </IfModule>
#</IfModule>
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
./conf-available/other-vhosts-access-log.conf 0100644 0000000 0000000 00000000275 12261546711 020120 0 ustar root root # Define an access log for VirtualHosts that don't define their own logfile
CustomLog ${APACHE_LOG_DIR}/other_vhosts_access.log vhost_combined
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
./conf-available/security.conf 0100644 0000000 0000000 00000004216 12261546711 015303 0 ustar root root #
# Disable access to the entire file system except for the directories that
# are explicitly allowed later.
#
# This currently breaks the configurations that come with some web application
# Debian packages.
#
#<Directory />
# AllowOverride None
# Order Deny,Allow
# Deny from all
#</Directory>
# Changing the following options will not really affect the security of the
# server, but might make attacks slightly more difficult in some cases.
#
# ServerTokens
# This directive configures what you return as the Server HTTP response
# Header. The default is 'Full' which sends information about the OS-Type
# and compiled in modules.
# Set to one of: Full | OS | Minimal | Minor | Major | Prod
# where Full conveys the most information, and Prod the least.
#ServerTokens Minimal
ServerTokens OS
#ServerTokens Full
#
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (internal error documents, FTP directory
# listings, mod_status and mod_info output etc., but not CGI generated
# documents or custom error documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of: On | Off | EMail
#ServerSignature Off
ServerSignature On
#
# Allow TRACE method
#
# Set to "extended" to also reflect the request body (only for testing and
# diagnostic purposes).
#
# Set to one of: On | Off | extended
TraceEnable Off
#TraceEnable On
#
# Forbid access to version control directories
#
# If you use version control systems in your document root, you should
# probably deny access to their directories. For example, for subversion:
#
#<DirectoryMatch "/\.svn">
# Require all denied
#</DirectoryMatch>
#
# Setting this header will prevent MSIE from interpreting files as something
# else than declared by the content type in the HTTP headers.
# Requires mod_headers to be enabled.
#
#Header set X-Content-Type-Options: "nosniff"
#
# Setting this header will prevent other sites from embedding pages from this
# site as frames. This defends against clickjacking attacks.
# Requires mod_headers to be enabled.
#
#Header set X-Frame-Options: "sameorigin"
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
./conf-available/serve-cgi-bin.conf 0100644 0000000 0000000 00000000707 12262777736 016105 0 ustar root root <IfModule mod_alias.c>
<IfModule mod_cgi.c>
Define ENABLE_USR_LIB_CGI_BIN
</IfModule>
<IfModule mod_cgid.c>
Define ENABLE_USR_LIB_CGI_BIN
</IfModule>
<IfDefine ENABLE_USR_LIB_CGI_BIN>
ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/
<Directory "/usr/lib/cgi-bin">
AllowOverride None
Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch
Require all granted
</Directory>
</IfDefine>
</IfModule>
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
./mods-enabled/access_compat.load 0120777 0000000 0000000 00000000000 12615650313 024452 2../mods-available/access_compat.load ustar root root ./mods-enabled/alias.conf 0120777 0000000 0000000 00000000000 12615650313 021240 2../mods-available/alias.conf ustar root root ./mods-enabled/alias.load 0120777 0000000 0000000 00000000000 12615650313 021224 2../mods-available/alias.load ustar root root ./mods-enabled/auth_basic.load 0120777 0000000 0000000 00000000000 12615650313 023246 2../mods-available/auth_basic.load ustar root root ./mods-enabled/authn_core.load 0120777 0000000 0000000 00000000000 12615650313 023320 2../mods-available/authn_core.load ustar root root ./mods-enabled/authn_file.load 0120777 0000000 0000000 00000000000 12615650313 023276 2../mods-available/authn_file.load ustar root root ./mods-enabled/authz_core.load 0120777 0000000 0000000 00000000000 12615650313 023350 2../mods-available/authz_core.load ustar root root ./mods-enabled/authz_host.load 0120777 0000000 0000000 00000000000 12615650313 023422 2../mods-available/authz_host.load ustar root root ./mods-enabled/authz_user.load 0120777 0000000 0000000 00000000000 12615650313 023424 2../mods-available/authz_user.load ustar root root ./mods-enabled/autoindex.conf 0120777 0000000 0000000 00000000000 12615650313 023056 2../mods-available/autoindex.conf ustar root root ./mods-enabled/autoindex.load 0120777 0000000 0000000 00000000000 12615650313 023042 2../mods-available/autoindex.load ustar root root ./mods-enabled/deflate.conf 0120777 0000000 0000000 00000000000 12615650313 022066 2../mods-available/deflate.conf ustar root root ./mods-enabled/deflate.load 0120777 0000000 0000000 00000000000 12615650313 022052 2../mods-available/deflate.load ustar root root ./mods-enabled/dir.conf 0120777 0000000 0000000 00000000000 12615650313 020412 2../mods-available/dir.conf ustar root root ./mods-enabled/dir.load 0120777 0000000 0000000 00000000000 12615650313 020376 2../mods-available/dir.load ustar root root ./mods-enabled/env.load 0120777 0000000 0000000 00000000000 12615650313 020422 2../mods-available/env.load ustar root root ./mods-enabled/filter.load 0120777 0000000 0000000 00000000000 12615650313 021614 2../mods-available/filter.load ustar root root ./mods-enabled/mime.conf 0120777 0000000 0000000 00000000000 12615650313 020734 2../mods-available/mime.conf ustar root root ./mods-enabled/mime.load 0120777 0000000 0000000 00000000000 12615650313 020720 2../mods-available/mime.load ustar root root ./mods-enabled/mpm_prefork.conf 0120777 0000000 0000000 00000000000 12615650326 023724 2../mods-available/mpm_prefork.conf ustar root root ./mods-enabled/mpm_prefork.load 0120777 0000000 0000000 00000000000 12615650326 023710 2../mods-available/mpm_prefork.load ustar root root ./mods-enabled/negotiation.conf 0120777 0000000 0000000 00000000000 12615650313 023716 2../mods-available/negotiation.conf ustar root root ./mods-enabled/negotiation.load 0120777 0000000 0000000 00000000000 12615650313 023702 2../mods-available/negotiation.load ustar root root ./mods-enabled/php5.conf 0120777 0000000 0000000 00000000000 12615650326 020612 2../mods-available/php5.conf ustar root root ./mods-enabled/php5.load 0120777 0000000 0000000 00000000000 12615650326 020576 2../mods-available/php5.load ustar root root ./mods-enabled/rewrite.load 0120777 0000000 0000000 00000000000 12656375541 022220 2../mods-available/rewrite.load ustar root root ./mods-enabled/setenvif.conf 0120777 0000000 0000000 00000000000 12615650313 022524 2../mods-available/setenvif.conf ustar root root ./mods-enabled/setenvif.load 0120777 0000000 0000000 00000000000 12615650313 022510 2../mods-available/setenvif.load ustar root root ./mods-enabled/socache_shmcb.load 0120777 0000000 0000000 00000000000 12656374050 024412 2../mods-available/socache_shmcb.load ustar root root ./mods-enabled/ssl.conf 0120777 0000000 0000000 00000000000 12656374050 020466 2../mods-available/ssl.conf ustar root root ./mods-enabled/ssl.load 0120777 0000000 0000000 00000000000 12656374050 020452 2../mods-available/ssl.load ustar root root ./mods-enabled/status.conf 0120777 0000000 0000000 00000000000 12615650313 021724 2../mods-available/status.conf ustar root root ./mods-enabled/status.load 0120777 0000000 0000000 00000000000 12615650313 021710 2../mods-available/status.load ustar root root ./conf.d/phppgadmin 0100664 0000000 0000000 00000001256 12615655721 013153 0 ustar root root Alias /phppgadmin /usr/share/phppgadmin
<Directory /usr/share/phppgadmin>
DirectoryIndex index.php
AllowOverride None
order deny,allow
deny from all
#allow from 127.0.0.0/255.0.0.0 ::1/128
allow from all
<IfModule mod_php5.c>
php_flag magic_quotes_gpc Off
php_flag track_vars On
#php_value include_path .
</IfModule>
<IfModule !mod_php5.c>
<IfModule mod_actions.c>
<IfModule mod_cgi.c>
AddType application/x-httpd-php .php
Action application/x-httpd-php /cgi-bin/php
</IfModule>
<IfModule mod_cgid.c>
AddType application/x-httpd-php .php
Action application/x-httpd-php /cgi-bin/php
</IfModule>
</IfModule>
</IfModule>
</Directory>